Advertisements

AT&T Galaxy S6 and Galaxy S6 Edge Stock Firmware Collections [Back to Stock ROM]

Today I decided to share all the collection of stock firmware for AT&T Galaxy S6 and Galaxy S6 Edge here. So if you are looking for AT&T Galaxy S6 and Galaxy S6 Edge Stock Firmware, then you are at the right place. Along with downloads, we have also shared the guide to flash the firmware file on your device using the ODIN Flash tool.

Samsung launched Galaxy S6 and Galaxy S6 Edge in March 2015 and it featured 5.1 inches Super AMOLED display with a screen resolution of 1440 x 2560 pixels and has a Curved edge screen only for Samsung Galaxy S6 Edge. It is protected by Corning Gorilla Glass 4 at the front and back panel. It is powered by an Octa-Core Exynos 7420 processor coupled with 3GB of RAM and comes with either 32GB/64GB/128GB of internal memory. Galaxy S6 and Galaxy S6 Edge sports a 16MP rear camera and 5MP front-facing camera. It comes out of the box with Android 5.0.2 Lollipop and later can be upgraded to the latest Android 7.0 Nougat.

AT&T Galaxy S6 and Galaxy S6 Edge Stock Firmware Collections

The Advantage Of Stock Firmware:

  • Flash Stock To Unbrick your AT&T Galaxy S6 and Galaxy S6 Edge
  • Flash Stock ROM to Fix the Bootloop problem
  • Upgrade and Downgrade AT&T Galaxy S6 and Galaxy S6 Edge
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on AT&T Galaxy S6 and Galaxy S6 Edge
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Note:

So before jump into the manual upgradation setup, please make sure you have a good amount of juice with at least 80% Charge. If not please charge the phone. Back up your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on AT&T Galaxy S6 and Galaxy S6 Edge.

PRE-REQUISITE :

  • Remember : This Stock Firmware is for AT&T Galaxy S6 and Galaxy S6 Edge.
  • Your device must have 70% Of battery
  • You need a Laptop or PC to perform this Action
  • Back-Up your Data to make sure you have data’s in case if something Wrong (This Process won’t lose your data)
  • Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your Phone.
  • Download and Install the Samsung Kies Software
  • Download and Install the Samsung USB Drivers
  • Download and Extract the ODIN ZIP file on Desktop

List of AT&T Galaxy S6 Firmware File Collections

Version/Build Number Android OS Security Patch
G920AUCS7ERC1 7.0 March 2018
G920AUCU7ERB1  7.0 February 2018
G920AUCS7ERA2  7.0 January 2018
G920AUCU6EQK3  7.0 December 2017
G920AUCS6EQJ1  7.0 October 2017
 G920AUCS6EQH1  7.0 August
 G920AUCS6EQG1  7.0 July
 G920AUCS6EQE1  7.0  May
 G920AUCU6EQCF  7.0  April
 G920AUCS6DQC1  6.0.1  March

List of AT&T Galaxy S6 Edge Firmware File Collections

Version/Build Number Android OS Security Patch
G925AUCS7ERC1 7.0 March 2018
G925AUCU7ERB1 7.0 February 2018
G925AUCS7ERA2 7.0 January 2018
G925AUCU6EQK3 7.0 December 2018
G925AUCS6EQJ2 7.0 October
G925AUCS6EQH1 7.0 August
G925AUCS6EQG1 7.0 July
 G925AUCS6EQE1  7.0  May
 G925AUCU6EQCF  7.0  April
G925AUCU5DQB3  7.0 March

Steps For How To Install Stock Firmware on AT&T Galaxy S6 and Galaxy S6 Edge.

  1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
    • First of all, enable the USB Debugging
    • To Enable the USB Debugging you need also to active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled
    • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging 
  2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator odin
  3. Now Reboot your Phone into Download Mode
  4. So First Turn your Phone off -> press and hold the Home + Power + Volume Down buttons Until you see a download mode.
  5. Now Connect your Phone to PC using the USB Cables
  6. When you connect the USB cable you will see a blue sign in Odin odin blue sign
  7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button ap pda
  8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)repartition odin
  9. Click the start button, sit back, and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restart while updating.

That’s ALL! When you restart your Phone, You will have the newly installed version of Stock ROM on AT&T Galaxy S6 and Galaxy S6 Edge. Enjoy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.