The Blackview BV9800 smartphone released in 2019. It is powered by Mediatek Helio P70 chipset, 6 GB of RAM and 128 GB of internal storage. Within a couple of years, MediaTek devices are growing rapidly as low-range entry-level budget segment Android devices.
The MediaTek chipsets offer better stability in performance, good battery backup, and more. Therefore, if you’re using any MediaTek chipset device and unfortunately or unintentionally you have done the factory reset. In a newer generation of MediaTek devices, if you have done the system reset, you may find the FRP Lock system on your device which is a new security measure provided by Google. You can’t do anything until you sign in or remove the previously used Google ID on your MediaTek device. Now, in that case, if you don’t know the credentials or can’t remember either, you should remove or bypass the FRP lock manually. In order to Remove Google Account or ByPass FRP lock on Blackview BV9800, we have provided a full guide. Check out the full article.
Blackview BV9800 Device Overview:
Blackview BV9800 was announced in October 2019 which sports a 6.3-inch IPS LCD display with a screen resolution of 1080 x 2280 pixels.
Blackview BV9800 is powered by a 4x 2.1 GHz ARM Cortex-A73, 4x 1.95 GHz ARM Cortex-A53, Cores: 8 with MediaTek Helio P70 chipset coupled with 6GB of RAM and 128GB of internal storage. It also supports an external memory card. The device came out of the box with Android 9.0 Pie and backed by a 6580 mAh battery (Non-removable).
As far as the camera concerned, the device has a dual-camera setup with 13MP + 2MP primary sensors and a selfie camera with an 8MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Blackview BV9800 comes with a face unlock feature.
What is FRP?
FRP stands for ‘Factory Reset Protection’. It’s a new security feature from Google for the MediaTek-powered devices which activates when you log in with Gmail ID on your device for the first time ever. After it gets activated, the security feature prevents the phone from using until you provide the same Google Account Credentials. Therefore, if you lost your phone and someone fully reset your device to use it, it will ask for credentials. That’s a good move from Google though but if you forget it, you have to follow the below-mentioned steps to remove it.
Now, check out the pre-requirements before going to the download section and installation steps.
- Supported for: Blackview BV9800 device only. Don’t try it on other devices.
- You will require a PC/Laptop and a USB cable in order to connect your device with the computer.
- Download SP Flash tool and extract it on your Windows PC/Laptop.
- Scatter File: Download Blackview BV9800 Stock ROM from here. It’s required to proceed with the FRP removal process.
- Download VCOM Drivers and install it on your PC.
- Download the Blackview USB Drivers on your PC and install it.
- Charge the phone battery up to 60% at least to reduce the occasional shutdown during installation.
After following all the requirements from above, you can go to the steps to remove FRP lock manually.
Steps to ByPass FRP or Remove Google account on Blackview BV9800
Follow the below-mentioned steps to remove FRP lock on Blackview BV9800 using SP Flash tool:
Guide to Bypass FRP Lock on any MediaTek Device via SP Flash Tool
You can check out our full-depth tutorial video as well:Video Guide on Remove Google Google Account Lock on a MediaTek Device using SP Flash Tool
We assume that this guide is helpful to you and you have successfully Removed Google Account from the Blackview BV9800 device. Now, you can setup a new Google Account on your MediaTek device and use properly. For any kind of issues or queries, let us know in the comments below.