Are you using the new STG S1 as your daily driver and stuck in Google verification to unlock your device? If yes, then here we will share the guide on how to bypass the FRP lock on your STG S1. Well, the device comes out of the box with Android 8.1 Oreo and powered by MediaTek chipsets. As we all know that MediaTek processors are known for their great performance in a budget price tag.
Pre-Requirements:
- A Windows or Mac PC/Laptop and a USB Cable will require.
- The following file will only work on the STG S1. Don’t try it on other devices.
- SP Flash Tool – Download and install on your PC.
- Scatter File: Download Stock Firmware of STG S1.
- Download MTK VCOM Drivers and install them on your computer.
- Download and install the Android USB Drivers on your PC.
- Charge phone battery up to 60% at least for a smoother process.
- Take a full backup of your device’s internal data before going to the next step.
After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:
Warning!
Steps to ByPass FRP lock verification on STG S1
Follow these instructions carefully to remove FRP lock on STG S1 MediaTek-powered device via SP Flash tool:
You can also take a look at our video guide to remove FRP lock on STG S1.
Video TutorialWe hope that you’ve successfully bypassed the FRP Lock on your STG S1 MediaTek running device. If you’ve any issues or queries regarding this, feel free to write down in the comments below.