ByPass FRP on Cubot C30 | Reset Using CM2, Miracle or UMT Tool

In this guide, we will show you how to bypass the FRP on the Cubot C30 smartphone. As we know, the device came out of the box with Android 10.0 powered by the latest MediaTek Helio P60 (MT6771) chipset.

If you are someone who has lost the Google account information to access your device after a factory reset, then this guide is for you. FRP stands for Factory Reset Protection that protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account on your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.

ByPass FRP on Cubot C30 | Reset Using CM2, Miracle or UMT Tool

Pre-Requirements:

  • This guide works only on Cubot C30. Don’t try it on other devices.
  • You need a Windows PC or Laptop with a working USB cable.
  • Download the SP Flash Tool for bypassing via 1st method.
  • For Scatter File: Download Cubot C30 Firmware Flash File
  • Download MTK VCOM Drivers and install them on your computer.
  • Download and install the Android USB Drivers¬†on your PC.
  • Make sure to charge your device to at least 60% before following this step.
  • Take a full backup of your device’s internal data.

After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:

Warning!

GetDroidTips won’t be responsible for any kind of error that occurs to your device while or after following this guide or flashing the scatter file. You should know what are you doing. Do it at your own risk!

Steps to ByPass FRP lock verification on Cubot C30

Method 1: Using SP Flash Tool

Follow these instructions carefully to remove the FRP lock on the Cubot C30 MediaTek-powered device via the SP Flash tool.

Advertisements

You can watch our video guide to remove the FRP lock on Cubot C30.

Method 2: Using Infinity CM2

Follow these instructions to bypass FRP lock on Cubot C30 via Infinity CM2:

Method 3: Using Miracle Box Tool

Follow these instructions to bypass FRP lock on Cubot C30 via Miracle Box Tool

We hope that you’ve successfully bypassed the FRP Lock on your Cubot C30. If you’ve any issues or queries regarding this, feel free to write them down in the comments below.

Advertisements

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.