Download Latest Doogee X95 USB Drivers | MediaTek Driver | and More

Doogee, the Chinese manufacturer, which is established in Spain after the launch of rugged smartphones, has recently unveiled its new low-end smartphone. Back in March, they unveiled the Doogee X95, which comes with a 6.5 inch LCD display, MediaTek MT6737 SoC, 2GB RAM, 16GB ROM, triple rear camera setup, 4,350 mAh battery, and runs on the latest Android 10.

If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Doogee X95 USB Drivers for Windows 7, 8, and 10 very simple.

It is very necessary to have USB drivers whenever you have to connect Doogee X95 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Doogee X95 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Doogee X95 USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Doogee X95 Device Overview

The Doogee X95 sports a 6.5 inches IPS LCD screen, which is paired with a Full HD resolution. This display has a screen to body ratio of 79.3 percent, a pixel density of 272 Pixel Per Inch (PPI), and a resolution of 540 x 1200 pixels. This screen is also a scratch-resistant one, and the brand uses a 2.5D curved glass.

Coming to the internals, the Doogee X95 sports an old MediaTek MT6737 SoC, which is built on the 28nm process. It is a quad-core SoC with the Cortex A53 cores clocked at 1.3GHz. To the GPU side, it sports the Mali-T720 GPU which is clocked between 550-650 MHz. Talking about the memory options available, it comes with 2GB of RAM and 16GB of internal storage. Further, this can be expanded via a micro SD card up to 32GB.

Advertisements

Coming to the optics, the Doogee X95 sports a triple rear camera setup, which is arranged in a round manner to the center of the smartphone. This arrangement is similar to the Vivo Nex 3, OnePlus 7T, which we had already seen. This setup includes a primary 13MP sensor with an aperture value of f/2.2. Further, it pairs with a 2MP depth sensor and another 2MP telephoto sensor. To the front, the smartphone sports a 5MP sensor, which comes with an aperture value of f/2.2. This front camera is housed inside the waterdrop notch upfront.

The Doogee X95 packs 4,350 mAh non-removable Li-ion battery that charges over the micro USB port. The device comes with support for 10W charging tech. The smartphone runs on the latest Android 10 out of the box.

Connectivity options include Micro USB 2.0, Bluetooth 4.1, Wi-Fi 802.11 a/b/g/n, Wi-Fi Direct, hotspot, GPS, and FM Radio. Sensors on board include accelerometer and proximity. This device is available in three color options which are Black, Blue, and Green. The brand still retains a 3.5mm headphone jack, and it a dedicated mic for noise cancellation. Coming to the dimensions of the device, it measures about 166.7 × 75.8 × 8.4 mm, and weighs about 176 grams. Finally, coming to the pricing of the Doogee X95, it starts at 87 dollars.

Doogee X95 USB drivers

The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Doogee X95 from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.

Advertisements
Download Latest USB Drivers

You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download, double tap on the file and follow the instructions on the screen.

How to Install Doogee X95 Latest USB Drivers

You can download and install Doogee X95 USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.

Doogee X95 MediaTek VCOM Drivers

The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver who will recognize your Doogee X95 when you connect it to PC. As we said, Doogee X95 is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etc

Advertisements
Download MediaTek USB VCOM Drivers

Download SP Flash tool for Doogee X95

Did your phone get into boot loops, or did you brick your Doogee X95 by messing up with its software? Then the simple solution is installing a Stock ROM file on Doogee X95. One day you might end up with a bricked phone. When it happens, the SP Flash tool comes in handy. SP Flash tool (also known as Smartphone flash tool) is a which windows / Linux application that offers total control over your smartphone. It means that you can have full access to modify and align the internal files according to your liking. The application only supports Mediatek smartphones.

By using SP flash tool, you even install a Custom Recovery, install Custom Kernel and also root your phone.

Download MediaTek USB VCOM Drivers

Doogee X95 ADB Fastboot Tool:

If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.

Download ADB and Fastboot tool

What is ADB?

ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.

What is Fastboot:

Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.

Instructions to Install:

Advertisement

You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.

For Windows //// For Mac 

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.