Download G973USQS2ASGB /G975USQS2ASGB: July 2019 patch for Verizon Galaxy S10/S10+

Verizon, the U.S. network carrier has now started to roll out the new updates for its Verizon models of the Samsung Galaxy S10/S10+ in the U.S.A. region. The updates for both the devices carry the version number G973USQS2ASGB and G975USQS2ASGB for Verizon Galaxy S10 and the Galaxy S10+, respectively.

Besides, both the updates brings in the new July 2019 security patch for the Verizon models of the Samsung Galaxy S10/S10+ devices. Also, note that these updates will be based on the Android 9 Pie. In this post, we will give you the links to download G973USQS2ASGB /G975USQS2ASGB: July 2019 patch for Verizon Galaxy S10/S10+. 

Normally, these updates will arrive the Verizon Galaxy S10/S10+ via OTA but, in this post, we will share with you the links for download as well. For users who do not want to install the updates manually, need to wait for the OTA to arrive on their devices. Besides, they can check for the update by heading to Settings > Software Updates > Download Updates Manually. Make sure to install the updates via a stable network connection or use WiFi. These OTA are rolled out in batches and it will take varied time to reach the devices based on the region.

However, there is another way via which you can download and install the updates on your Verizon Galaxy S10/S10+ devices. Basically, it requires some of your effort along with the Odin Flash tool for Samsung. So, without any further ado, let us get straight into the article itself;

Download G973USQS2ASGB /G975USQS2ASGB: July 2019 patch for Verizon Galaxy S10/S10+

Firmware Details

1. G973USQS2ASGB Firmware for Verizon Galaxy S10

2. G975USQS2ASGB Firmware for Verizon Galaxy S10+

Firmware Download Links

Below are the download links to the G973USQS2ASGB/G975USQS2ASGB for the Verizon Samsung Galaxy S10/S10+, respectively;

Download the Odin Flash tool

For updating your Verizon Galaxy S10/S10+, you can either wait for the official OTA to arrive on your device or you can flash the updates manually on your device. If you want to go ahead and install the update manually, you need to download the firmware as well as the latest Odin Flash Tool. Below is the download link to download the latest Odin flash tool;

Pre-requisites

• Make sure to charge your device to at least 60% or more.
• You need a PC/Laptop.
• Take a full backup of your device.
• Install the USB drivers for your respective device on your PC/laptop.
• Download and install Samsung Kies Software.
• You need to enter into the Samsung Download Mode.

Steps to Install the Stock Firmware

You simply need to follow the below guides on how to flash the Samsung firmware to complete stock.

Check out our full depth video guide as well.

So, there you have it from my side in this post. Hope you have successfully flashed the latest firmare on the Verizon Galaxy S10/S10+ with the steps mentioned above. Until the next post…Cheers!