Download And Install Galaxy Note 4 with Build N910FXXS1DQC3 (March Security)

Download And Install Galaxy Note 4 with Build N910FXXS1DQC3 (March Security)
Advertisements

Last updated on March 29th, 2017 at 11:06 pm

With Samsung S5 Duos, Galaxy J7 Prime and more, Samsung also started seeding new OTA update for Galaxy Note 4. Today Samsung has started seeding a new firmware update for Galaxy Note 4. The latest OTA comes with build number N910FXXS1DQC3 for Galaxy Note 4. If you are running the Stock Marshmallow on Samsung Galaxy Note 4, then you will receive the notification anytime soon on your device. The update is sent via OTA (Over the air) to all Galaxy Note 4 in Phase wise manner.

The latest build N910FXXS1DQC3 comes with March Security Patch, fixes several bugs and improves the stability and performance of the device. Now you can enjoy the latest Android 6.0.1 Marshmallow for Galaxy Note 4 SM-N910F by following the below step by step guide to flash Android 6.0.1 Marshmallow on Galaxy Note 4 N910F. This new update comes with March 2017 Android Security Patch for Galaxy Note 4 SM-N910F.

Download And Install Galaxy Note 4 with Build N910FXXS1DQC3 (March Security)

Advertisements

In our guide, you can either follow any of the three method to get N910FXXS1DQC3  Stock Marshmallow update on Galaxy Note 4 N910F. You can use OTA, Kies or even the ODIN to update N910FXXS1DQC3 firmware on Samsung Galaxy Note 4.

In case if you don’t want to update via ODIN, then If you are Still waiting for the update and you not yet received any notification, then follow the simple step below to see if you have received the update.

To Check for latest Update, Go to Settings -> About Phone -> Software Updates.

If you have the update then press download and upgrade the OTA to Android 6.0.1 Marshmallow. If you didn’t receive and you still want the update, then don’t worry. You can Update Galaxy Note 4 to Android Marshmallow manually by following the below steps. So read the steps carefully to Update Galaxy Note 4 N910F to Marshmallow.

Yes, today i will guide you on How to Update Build N910FXXS1DQC3 based Marshmallow for Galaxy Note 4. Remember, Below guide is to update full OTA firmware file on Galaxy Note 4.

ALSO RELATED POST : 

PRE-REQUISITE :

  • Remember : This guide is to Install March Secuity Patch update on Galaxy Note 4 N910F (N910FXXS1DQC3).
  • Your device must have 70% Of battery
  • You need a Laptop or PC to perform this Action
  • You should be using Stock Firmware and not Custom ROM
  • Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
  • Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED :

Advertisements
  • Download and Install the Samsung Kies Software : CLICK HERE or
  • Download and Install the SamsungUSB Drivers : CLICK HERE
  • Download and Extract the ODIN ZIP file on Desktop : CLICK HERE
DOWNLOAD N910FXXS1DQC3 FULL ROM for Samsung Galaxy Note 4

Steps For How To Install N910FXXS1DQC3 Stock Marshmallow for Samsung Galaxy Note 4 N910F .

  1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
    • First of all, enable the USB Debugging
    • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled
    • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging 
  2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator odin
  3. Now Reboot your Phone into Download Mode
  4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
  5. Now Connect your Phone to PC using the USB Cables
  6. When you connect the USB cable you will see a blue sign in Odin odin blue sign
  7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button ap pda
  8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)repartition odin
  9. Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.

That’s ALL! When you restart your Phone , You will have a whole new experience with the update of Galaxy Note 4 N910F to N910FXXS1DQC3 update. Enjoy! We have Given the Full guide on How to Update Android Marshmallow to Galaxy Note 4 N910F .

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Previous Post
Vivo X7 Plus

How To Install Official Stock ROM On Vivo X7 Plus (Firmware File)

Next Post
Download And Install Galaxy Tab A 2016 with Build P585JXU2AQC2 (March Security)

Download And Install Galaxy Tab A 2016 with Build P585JXU2AQC2 (March Security)

Related Posts