Tecno is a Chinese smartphone vendor that is based in Hong Kong. The brand was established back in 2006 and has been focusing on African, and South Asian countries. Back in 2008, the brand limited to its operations for Africa. And, after the huge success in Africa, they entered into the Middle East markets in 2016, and in 2017, finally, they re-entered to the Asian markets. Back in December 2019, the brand announced its new entry-level smartphone i.e. the Tecno Pop 3 Plus.
If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Tecno Pop 3 Plus USB Drivers for Windows 7, 8, and 10 very simple.
It is very necessary to have USB drivers whenever you have to connect Tecno Pop 3 Plus to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Tecno Pop 3 Plus manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Tecno Pop 3 Plus USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Tecno Pop 3 Plus Device Overview
The Tecno Pop 3 Plus sports a 6.52 inches IPS LCD display with an HD+ resolution. This means that it has a screen resolution of 1520 x 720 pixels. Further, the display also sports a screen to body ratio of 82.9 percent, a pixel density of 269 Pixel Per Inch ( PPI ), and an aspect ratio of 20:9.
Underneath the Tecno Pop 3 Plus it sports the MediaTek Helio A22 quad-core SoC. This SoC is also known as MediaTek 6762. It is built on the 12nm process and has four ARM Cortex-A53 cores which are clocked at 2GHz and pairs with PowerVR GE6320 GPU which clocks at 650 MHz. This Helio A22 chipset pairs with 1GB RAM of options. Further, the device comes with 16GB of eMMC 5.1 Internal storage. Further, it is also expandable via a micro SD card slot. The device sports a dedicated SIM card slot where you guys can insert two Nano type SIM card, and a micro SD card at the same time.
Coming to the optics department, the Tecno Pop 3 Plus sports a single rear camera setup. This camera setup includes an 8MP single sensor with support for autofocus. Further, it also comes with an LED flash and can shoot HDR, & panorama photos. There is an 8MP selfie camera with an aperture value of f/2.0. This sensor can also shoot videos up to 1080p @ 30fps.
The Tecno Pop 3 Plus has a 4,000 mAh battery which still charges over a micro USB port. This smartphone runs on the HiOS 5.5 that is based on the Android 9 Pie. It supports for Face Unlock and has a rear fingerprint sensor as well. Connectivity options include Wi-Fi 802.11 a/b/g/n, GPS with A-GPS, Bluetooth 4.2, A2DP, LE. FM radio, and micro USB 2.0. Sensors on board include an accelerometer and proximity sensor. When launched it was made available in three color options namely the Midnight Black, Vacation Blue, and Hillier Purple. Talking about the dimensions, it measures about 166.7 x 75.8 x 8.4 mm (6.56 x 2.98 x 0.33 in) and weighs about 180.5 grams.
Tecno Pop 3 Plus USB drivers
The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Tecno Pop 3 Plus from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.Download Latest USB Drivers
You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download, double tap on the file and follow the instructions on the screen.
How to Install Tecno Pop 3 Plus Latest USB Drivers
You can download and install Tecno Pop 3 Plus USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.
Tecno Pop 3 Plus MediaTek VCOM Drivers
The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver who will recognize your Tecno Pop 3 Plus when you connect it to PC. As we said, Tecno Pop 3 Plus is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etcDownload MediaTek USB VCOM Drivers
Download SP Flash tool for Tecno Pop 3 Plus
Did your phone get into boot loops, or did you brick your Tecno Pop 3 Plus by messing up with its software? Then the simple solution is installing a Stock ROM file on Tecno Pop 3 Plus. One day you might end up with a bricked phone. When it happens, the SP Flash tool comes in handy. SP Flash tool (also known as Smartphone flash tool) is a which windows / Linux application that offers total control over your smartphone. It means that you can have full access to modify and align the internal files according to your liking. The application only supports Mediatek smartphones.
By using SP flash tool, you even install a Custom Recovery, install Custom Kernel and also root your phone.Download MediaTek USB VCOM Drivers
Tecno Pop 3 Plus ADB Fastboot Tool:
If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.Download ADB and Fastboot tool
What is ADB?
ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.
What is Fastboot:
Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.
Instructions to Install:
You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.