The Chinese smartphone company TENCO announced its TECNO Spark 5 in the Indian market of 22nd of May, 2020. It packs with a bunch of wonderful features like quad-camera setup, MediaTek Helio A22 SoC, and much more. Today in this guide, we will share the Tecno Spark 5 USB Driver for Windows and Mac.
It’s always necessary for any smartphone to have a compatible USB Driver installed on the computer in order to connect the device and transfer data easily. Most importantly, Android users prefer USB Driver due to the flashing firmware or any other file via command or using any tool. Therefore, if in case, your device’s specific USB Driver isn’t installed on the PC, it will become a tough job to easily connect or detect the internal storage of your Tecno Spark 5.
Table of Contents
Tecno Spark 5 Device Overview:
The Tecno Spark 5 features an outsized 6.6-inch display with a resolution of 1600 x 720 pixels (HD+) within the tall 20:9 ratio. This LCD panel also boasts of 480nits of brightness. This display gets a ‘dot notch’ where the 8MP selfie camera finds pride of place.
At the rear, the phone gets a quad-camera setup that consists of a 13MP primary camera with f/2.0 aperture. aside from this, the phone also gets twin 2MP sensors for bokeh and macro imaging. The fourth camera – the resolution of which hasn’t been revealed – is employed as a fanatical AI sensor, the corporate says.
An entry-level device, the Tecno Spark 5 finds itself being powered by the MediaTek Helio A22 SoC. supported a 12nm manufacturing process, this chipset is positioned even below the Helio P22 SoC that’s usually found on devices during this price range. This chipset houses a quad-core processor with four Cortex-A53 cores and also gets the PowerVR GE8320 GPU for graphics.
The Tecno Spark 5 runs Tecno’s own HiOS 6.1 at launch, which is itself supported Android 10. The device gets a triple slot, which suggests customers can use two SIM cards and a microSD card at an equivalent time on the device. The phone also ships with a huge 5,000mAh battery that ought to be quite capable of endowing the Tecno Spark 5 with neatly two days of battery life.
How to Download and Install Tecno Spark 5 USB Driver
The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed driver from your PC in case you have installed it. Once you are done, click the below link to download Tecno Spark 5 USB Drivers on your PC.
You can download and install Tecno Spark 5 USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.
Download MediaTek USB Drivers
The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver who will recognize your Tecno Spark 5 when you connect it to PC. As we said, Tecno Spark 5 is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etc
Download SP Flash Tool
To Know more about SP Flash Tool, you can check our article about the SP Flash Tool and its instructions.
Tecno Spark 5 ADB Fastboot Tool:
If you have bought Tecno Spark 5, you can download and install ADB and Fastboot tool on your PC. This tool is useful if you have permission to unlock the bootloader, install mods, custom ROM, root using Magisk, or SuperSU.
I hope this guide was useful to install Tecno Spark 5 USB Driver and ADB driver. If you have any queries or comments, please let us know below.