How to Enter and Exit Fastboot mode on Huawei Mate 9

Here we will guide on how to enter and exit fastboot mode on Huawei Mate 9. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into fastboot is very important.

The Fastboot mode is also known by Download Mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is flashing stock firmware (Stock ROMs), flashing custom recoveries like TRWP and CWM, restoring backups, unlocking the bootloader, installing OTA updates, removing bloatware, tweaking system, overclocking Android phones amongst other uses.

How to Enter and Exit Fastboot mode on Huawei Mate 9

How to Enter Fastboot mode on Huawei Mate 9:

  1. First of all, Turn off your Huawei Mate 9.
  2. Now connect a USB Cable to PC
  3. Press and hold Volume Down and Plug the USB cable to your Huawei Mate 9.
  4. Release all button when you see the fastboot screen
Check out the video on How to Enter Fastboot mode on any Huawei device

How to Exit Fastboot on Huawei Mate 9:

  • When you are in the fastboot mode, press and hold the power button for few seconds.
  • Hold until you see the phone reboots.
  • Release the button when you see the Huawei logo

[su_note note_color=”#fdeff9″ text_color=”#000000″]Do you want to install Stock ROM on Huawei Mate 9? Then, here is the full guide install the Huawei Mate 9 Stock Firmware.[/su_note]

I hope this guide was useful to Enter and Exit Fastboot mode on Huawei Mate 9.

Huawei Mate 9 Specifications:

Huawei Mate 9 features a 5.9 inches IPS LCD display with a screen resolution of 1080 x 1920 pixels. The smartphone is powered by Quad-core 4×2.4 GHz Cortex-A73 HiSilicon Kirin 960 processor coupled with 4GB of RAM. The phone packs 64GB internal memory which can also be expanded upto 256GB via microSD card. The camera on the Huawei Mate 9 comes with dual 12 MP + 20 MP, phase detection autofocus, LED flash, HDR, panorama and 8 MP front shooting camera.

Huawei Mate 9 runs on Android 7.0 Nougat, upgradable to Android 8.0 Oreo with EMUI 5.0 and backed by Li-Po 4000 mAh Non-removable battery. It also has Fingerprint sensor on the back. The handset supports Hybrid Dual SIM with 4G on both slot. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G and 4G.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.