Here we will guide on how to enter and exit fastboot mode on Huawei Y3II. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into fastboot is very important.
The Fastboot mode is also known by Download Mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is flashing stock firmware (Stock ROMs), flashing custom recoveries like TRWP and CWM, restoring backups, unlocking the bootloader, installing OTA updates, removing bloatware, tweaking system, overclocking Android phones amongst other uses.
How to Enter Fastboot mode on Huawei Y3II:
- First of all, Turn off your Huawei Y3II.
- Now connect a USB Cable to PC
- Press and hold Volume Down and Plug the USB cable to your Huawei Y3II.
- Release all button when you see the fastboot screen
How to Exit Fastboot on Huawei Y3II:
- When you are in the fastboot mode, press and hold the power button for few seconds.
- Hold until you see the phone reboots.
- Release the button when you see the Huawei logo
[su_note note_color=”#fdeff9″ text_color=”#000000″]Do you want to install Stock ROM on Huawei Y3II? Then, here is the full guide install the Huawei Y3II Stock Firmware.[/su_note]
I hope this guide was useful to Enter and Exit Fastboot mode on Huawei Y3II.
Huawei Y3II Specifications:
Huawei Y3II features a 4.5 inches IPS LCD display with a screen resolution of 480 x 854 pixels. The smartphone is powered by Quad-core 1.0 GHz Cortex-A53 Mediatek MT6735M processor coupled with 1GB of RAM. The phone packs 8GB internal memory which can also be expanded upto 32GB via microSD card. The camera on the Huawei Y3II comes with 5 MP, Dual-LED flash and 2 MP front camera.
Huawei Y3II runs on Android 5.1 Lollipop with EMUI 3.1 and backed by Li-Po 2100 mAh Non-removable battery. The handset supports Dual SIM with 4G on both slot. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G and 4G.