How to Enter Fastboot mode on Cubot Echo

Advertisements

Here we will guide on how to enter and exit fastboot mode on Cubot Echo. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into fastboot is very important.

The Fastboot mode is also known by Download Mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is to re-flash partitions on your device (update the flash file system in Android devices). In practical use, it is used to flash images such as recoveries, bootloaders, and kernels to your Android device.

How to Enter Fastboot mode on Cubot Echo

How to Enter Fastboot mode on Cubot Echo:

As of now, this method ain’t working on this device. You need to wait for a couple of days.

Advertisements
  1. First of all, Turn off your Cubot Echo.
  2. Press and hold Volume Up + Power Button for about 10 seconds
  3. Release all button when you see the screen with which shows FASTBOOT

How to Exit Fastboot on Cubot Echo:

  • When you are in the fastboot mode, press and hold the power button for a few seconds.
  • Hold until you see the phone reboots.
  • Release the button when you see the Cubot Echo Logo

I hope this guide was helpful to boot fastboot mode on Cubot Echo.

Cubot Echo Specifications:

Talking about the specifications, Cubot Echo features a 5-inch IPS LCD display with a screen resolution of 1280 x 720 Pixels. It is powered by MediaTek MT6580, Processor coupled with 2GB of RAM. The phone packs 16GB internal memory with expandable storage support of 128GB via microSD card. The camera on the Cubot Echo comes with 13MP rear camera with dual-LED dual-tone flash and 5MP front camera for selfies. It is backed by a Removable Lithium-Ion 3,000 mAh battery.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.