Here we will guide on how to enter download or odin mode on T-Mobile Galaxy S8 Active. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into download mode is very important.
The Download mode is also known by fastboot mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is flashing stock firmware (Stock ROMs), flashing custom recoveries like TRWP and CWM, restoring backups, unlocking the bootloader, installing OTA updates, removing bloatware, tweaking system, overclocking Android phones amongst other uses.
Steps to Enter Download or Odin mode on T-Mobile Galaxy S8 Active
- First of all, Turn off your T-Mobile Galaxy S8 Active.
- Press and hold Volume Down and then power up the T-Mobile Galaxy S8 Active device by holding the Power button for a while
- Release all button when you see the screen with Warning, you can confirm by pressing Volume UP button.
- or you can use Volume Down button to cancel or restart the T-Mobile Galaxy S8 Active.
I hope this guide was helpful to boot into download mode or odin mode on T-Mobile Galaxy S8 Active.
T-Mobile Galaxy S8 Active Specifications:
T-Mobile Galaxy S8 Active sports a 5.8 inches Super AMOLED display with a screen resolution of 1440 x 2960 pixels. It is powered by 4×2.35 GHz Kryo & 4×1.9 GHz Kryo Octa-core Qualcomm MSM8998 Snapdragon 835 (10 nm). The device packs 64GB internal storage and 4GB of RAM. There is 512GB expandable memory support. The camera on this device sports a single camera 12 MP with an aperture f/1.7 and a 8 MP shooter for selfies. The T-Mobile Galaxy S8 Active runs Android 7.0 Nougat, planned upgrade to Android 8.0 Oreo and backed by a Li-Ion 4000 mAh battery. The handset has a back mounted fingerprint sensor.