Here we will guide on how to enter download or odin mode on AT&T Galaxy Express Prime 3. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into download mode is very important.
The Download mode is also known by fastboot mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is flashing stock firmware (Stock ROMs), flashing custom recoveries like TRWP and CWM, restoring backups, unlocking the bootloader, installing OTA updates, removing bloatware, tweaking system, overclocking Android phones amongst other uses.
Steps to Enter Download or Odin mode on AT&T Galaxy Express Prime 3
- First of all, Turn off your AT&T Galaxy Express Prime 3.
- Press and hold Volume Down and then power up the AT&T Galaxy Express Prime 3 device by holding the Power button for a while
- Release all button when you see the screen with Warning, you can confirm by pressing Volume UP button.
- or you can use Volume Down button to cancel or restart the AT&T Galaxy Express Prime 3.
I hope this guide was helpful to boot into download mode or odin mode on AT&T Galaxy Express Prime 3.
AT&T Galaxy Express Prime 3 Specifications:
AT&T Galaxy Express Prime 3 sports a 5 inches TFT display with a screen resolution of 1280 x 720 pixels. It is powered by Quad-core, 1.4 GHz, Exynos 7570. The device packs 16GB internal storage and 8GB of RAM. There is 256GB expandable memory support. The camera on this device sports a single camera 8 MP with an aperture f/1.7 and a 5 MP shooter for selfies. The AT&T Galaxy Express Prime 3 runs Android 8.0 Oreo and backed by a Li-Ion 2600 mAh battery.