Advertisements

How To Install Flyme OS 7 On Meizu M3s [Beta and Stable Stock ROM]

Here in this guide, we will show you how to download and install the Flyme OS 7 on Meizu M3s smartphone. The guide to install the ROM zip file is easy. You can install via Meizu M3s recovery mode.

Meizu M3s was launched on June 2016. The Meizu M3s came out of the box with Android 5.1 Lollipop. Recently the Meizu rolled the latest version of Flyme OS 7 for most of their devices which bring new UI and customizations. Now you can download and install Flyme OS 7 on Meizu M3s.

In this guide, we will show you how to install the latest Flyme OS 7 on Meizu M3s smartphone. Meizu is one of the popular Chinese OEM with its very own operating system Flyme OS. Currently, Flyme OS 7 is based on Android 8.0 oreo is rolling for various Meizu devices. So, Meizu users can now install Flyme OS 7 Android Oreo on Meizu M3s which is the iteration of the ROM.

How To Install Flyme OS 7 On Meizu M3s

Meizu M3s Specifications:

Talking about the specifications, Meizu M3s features a 5.0-inch display with a screen resolution of 720 x 1280 pixels. It is powered by Mediatek MT6750 processor and it comes with 2/3GB of RAM. The phone packs 16/32GB of internal storage that can be expanded. As far as the cameras are concerned, the Meizu M3s packs a 13MP primary camera on the rear and a 5-megapixel front shooter for selfies. The Meizu M3s runs Android 5.1 Lollipop and is powered by a Non-removable 3020 mAh battery. It also has Fingerprint in the front.

FlymeOS 7: Features and Highlights

Flyme OS 7 brings some really innovative new features to the Meizu devices. This includes smart recognition on the basis of age, skin, gender. It will also have smart ear protection that will adjust music volumes when the user uses a headphone. Again, Flyme 7 OS comes with AI anti-virus engine that automatically analyzes/ predicts and intercepts virus. The latest version of Flyme also brings smart caller ID and the trending face recognition feature. You can also check out the List of Meizu devices that will receive Flyme OS 7.

Download Firmware Here

Download Stock FlymeOS 7 Firmware

Steps to Install Flyme OS 7 on Meizu M3s

Before heading towards the ROM flashing, you have to follow certain guidelines that we have put up below. There are two methods to install the Flyme OS 7 For Meizu M3s.

Stock Recovery Method:

In this method, you can directly install the Flyme OS 7 on your phone by using Stock Recovery.

Pre-Requisite

  • Ensure your Meizu M3s must be running on stock firmware.
  • Your Meizu device should run previous firmware ie Flyme OS 6.3.0 to be eligible to update to latest Flyme OS 7.
  • The firmware is exclusively for corresponding Meizu devices. Don’t use them on any other devices.
  • Charge the battery of your device to at least 70% or more.
  • Take a backup of your device in case there is any loss of data. Usually, no data loss happens in this process.
  • GetDroidTips will not be responsible for any bricking/damage to your device while/after installing this update.

Steps to Install Stock Recovery Method:

  1. First Download Flyme OS 7 ROM zip file for the Meizu M3s.
  2. Now move the ROM zip file to your device storage.
  3. Switch off your device > Press and hold the Volume+ button >  press the power button
  4. Now your device will enter the upgrade mode.
  5. Select System upgrade > tap Start.

It will take some time for the flashing to complete. Wait until then.

Custom Recovery Method:

For this method, you need to unlock the bootloader on your phone and also you should have TWRP Recovery on Meizu M3s. If you already have TWRP, then you can simply follow the below method to install Flyme OS 7 on Meizu M3s using TWRP Recovery.

Pre-Requisite

  1. This method is for Meizu M3s.
  2. Charge your phone up to 80% or 70%.
  3. You need to download Meizu USB Drivers.
  4. You will lose the original ROM or any CUSTOM ROM which is running on your phone. So make sure to Backup your phone before doing this step using TWRP or CWM or any Custom Recovery.
  5. Install TWRP Recovery on Meizu supported device
  6. Download all the Zip files from below and Place it in your phone’s root of internal memory.

Steps to install via TWRP Recovery:

You can simply follow the guide given in the link below. If TWRP is supported, then installation of Stock Meizu ROM is to be same as installing Custom ROM.

How to Install a Custom ROM using TWRP Recovery

So, if you own a Meizu M3s device, then install the Flyme OS 7 and enjoy Android Oreo on your Meizu M3s. Let us know about your experience.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.