How To Install Flyme OS 7 On Meizu MX4 Pro [Beta and Stable Stock ROM]

Here in this guide, we will show you how to download and install the Flyme OS 7 on Meizu MX4 Pro smartphone. The guide to install the ROM zip file is easy. You can install via Meizu MX4 Pro recovery mode.

Meizu MX4 Pro was launched on October 2014. The Meizu MX4 Pro came out of the box with Android 4.4.4 Kitkat. Recently the Meizu rolled the latest version of Flyme OS 7 for most of their devices which bring new UI and customizations. Now you can download and install Flyme OS 7 on Meizu MX4 Pro.

In this guide, we will show you how to install the latest Flyme OS 7 on Meizu MX4 Pro smartphone. Meizu is one of the popular Chinese OEM with its very own operating system Flyme OS. Currently, Flyme OS 7 is based on Android 8.0 oreo is rolling for various Meizu devices. So, Meizu users can now install Flyme OS 7 Android Oreo on Meizu MX4 Pro which is the iteration of the ROM.

How To Install Flyme OS 7 On Meizu MX4 Pro

Meizu MX4 Pro Specifications:

Talking about the specifications, Meizu MX4 Pro features a 5.5-inch display with a screen resolution of 1536 x 2560 pixels. It is powered by Exynos 5430 Octa processor and it comes with 3GB of RAM. The phone packs 16/32/64GB of internal storage that can be expanded. As far as the cameras are concerned, the Meizu MX4 Pro packs a 20.7MP primary camera on the rear and a 5-megapixel front shooter for selfies. The Meizu MX4 Pro runs Android 4.4.4 Kitkat and is powered by a Non-removable 3350 mAh battery. It also has Fingerprint in the front.

FlymeOS 7: Features and Highlights

Flyme OS 7 brings some really innovative new features to the Meizu devices. This includes smart recognition on the basis of age, skin, gender. It will also have smart ear protection that will adjust music volumes when the user uses a headphone. Again, Flyme 7 OS comes with AI anti-virus engine that automatically analyzes/ predicts and intercepts virus. The latest version of Flyme also brings smart caller ID and the trending face recognition feature. You can also check out the List of Meizu devices that will receive Flyme OS 7.

Download Firmware Here

Download Stock FlymeOS 7 Firmware

Steps to Install Flyme OS 7 on Meizu MX4 Pro

Before heading towards the ROM flashing, you have to follow certain guidelines that we have put up below. There are two methods to install the Flyme OS 7 For Meizu MX4 Pro.

Stock Recovery Method:

In this method, you can directly install the Flyme OS 7 on your phone by using Stock Recovery.


  • Ensure your Meizu MX4 Pro must be running on stock firmware.
  • Your Meizu device should run previous firmware ie Flyme OS 6.3.0 to be eligible to update to latest Flyme OS 7.
  • The firmware is exclusively for corresponding Meizu devices. Don’t use them on any other devices.
  • Charge the battery of your device to at least 70% or more.
  • Take a backup of your device in case there is any loss of data. Usually, no data loss happens in this process.
  • GetDroidTips will not be responsible for any bricking/damage to your device while/after installing this update.

Steps to Install Stock Recovery Method:

  1. First Download Flyme OS 7 ROM zip file for the Meizu MX4 Pro.
  2. Now move the ROM zip file to your device storage.
  3. Switch off your device > Press and hold the Volume+ button >  press the power button
  4. Now your device will enter the upgrade mode.
  5. Select System upgrade > tap Start.

It will take some time for the flashing to complete. Wait until then.


Custom Recovery Method:

For this method, you need to unlock the bootloader on your phone and also you should have TWRP Recovery on Meizu MX4 Pro. If you already have TWRP, then you can simply follow the below method to install Flyme OS 7 on Meizu MX4 Pro using TWRP Recovery.


  1. This method is for Meizu MX4 Pro.
  2. Charge your phone up to 80% or 70%.
  3. You need to download Meizu USB Drivers.
  4. You will lose the original ROM or any CUSTOM ROM which is running on your phone. So make sure to Backup your phone before doing this step using TWRP or CWM or any Custom Recovery.
  5. Install TWRP Recovery on Meizu supported device
  6. Download all the Zip files from below and Place it in your phone’s root of internal memory.

Steps to install via TWRP Recovery:

You can simply follow the guide given in the link below. If TWRP is supported, then installation of Stock Meizu ROM is to be same as installing Custom ROM.

How to Install a Custom ROM using TWRP Recovery

So, if you own a Meizu MX4 Pro device, then install the Flyme OS 7 and enjoy Android Oreo on your Meizu MX4 Pro. Let us know about your experience.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.