Here we will guide on how to enter and exit fastboot mode on Honor 8X Max. If you want to install Custom Recovery, Stock ROM or unbrick your device, then booting into fastboot is very important.
The Fastboot mode is also known by Download Mode or Bootloader Mode. This is very useful for many reasons. The most common use of the fastboot mode is flashing stock firmware (Stock ROMs), flashing custom recoveries like TRWP and CWM, restoring backups, unlocking the bootloader, installing OTA updates, removing bloatware, tweaking system, overclocking Android phones amongst other uses.
How to Enter Fastboot mode on Honor 8X Max:
- First of all, Turn off your Huawei Honor 8X Max.
- Now connect a USB Cable to PC
- Press and hold Volume Down and Plug the USB cable to your Honor 8X.
- Release all button when you see the fastboot screen
How to Exit Fastboot on Huawei Honor 8X Max:
- When you are in the fastboot mode, press and hold the power button for few seconds.
- Hold until you see the phone reboots.
- Release the button when you see the Huawei logo
[su_note note_color=”#fdeff9″ text_color=”#000000″]Do you want to install Stock ROM on Huawei Honor 8X Max? Then, here is the full guide install the Huawei Honor 8X Max Stock Firmware.[/su_note]
I hope this guide was useful to Enter and Exit Fastboot mode on Honor 8X Max.
Huawei Honor 8X Max Specifications:
Huawei Honor 8X Max comes with a 7.2 inch Full HD IPS Display which looks quite good. Under the hood, the Huawei Honor 8X Max is powered by a Qualcomm SDM636 Snapdragon 636 chip which is quite powerful even today. On the Graphics side, the device comes with an Adreno 509 GPU out of the box.
The Huawei Honor 8X comes in 2 variants, one with 4GB of RAM along with 64 GB of internal storage and another one with 6 GB of RAM and 128 GB of internal storage. The device has a Dual 16 MP, f/2.0 with 2 MP (f/2.4) depth sensor on the rear and an 8 MP front-facing camera. All this is powered by a 5000 mAh Non-Removable battery.