How to Install Stock Firmware on Intex Aqua Lite [Back to Stock ROM/Unbrick]

Intex has introduced a new smartphone called Intex Aqua Lite. The smartphone was launched in  February 2016. If you have bought this device and want to install Stock Firmware on Intex Aqua Lite? Then you are the right place. Here we will guide you to install the official Stock ROM on Intex Aqua Lite using the software known as SP Flash Tool, Formally also called Smartphone Flash tool. If you have installed Custom ROM or bricked your device, then this guide will be helpful to fix back to Stock ROM or unbrick it.

Talking about the specs, Intex Aqua Lite features a 4.0-inches display with a screen resolution of 480 x 800 pixels. It is powered by 1.3GHz quad-core processor with 512MB of RAM and 4GB internal storage. The device sports a 2MP rear camera and 2MP front camera. Intex Aqua Lite runs on Android 5.1 Lollipop out of the box and is powered by a 1400mAh removable battery.

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then simply follow the given instruction link to install the Stock Firmware on Intex Aqua Lite using SP Flash tool. Yes, this guide is also helpful to recover, unroot or fix any software or hardware malfunctioning problem.

Steps to Install Stock Firmware on Intex Aqua Lite

Remember this guide is also very much needed in case of upgrade or downgrade the firmware on Intex Aqua Lite. First of all, download the software, Smartphone Flashtool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Intex Aqua Lite using this guide.

The Advantage Of Stock ROM:

• Flash Stock To Unbrick your Intex Aqua Lite
• Flash Stock ROM to Fix the bootloop problem
• Upgrade and Downgrade Intex Aqua Lite
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Intex Aqua Lite
• By flashing Stock ROM, you can solve software problems.
• Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jumping into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update the Stock firmware on Intex Aqua Lite.

Download Firmware

Click Here to Download

Pre Requisite :

• This firmware supported only on Intex Aqua Lite.
• Download the SP Flash Tool: Download and Extract it
• VCOM driver:  Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
• Download and Install Intex USB Drivers
• Charge your phone for at least 70%
• Back up your device just in case if you need it later
• You need either Laptop or PC

Follow Guide to Install Stock ROM using SP Flash Tool Software.

I hope you installed the Stock ROM on Intex Aqua Lite successfully, Now please rate this website with your comment. We always welcome feedback and improvements.