Samsung is currently rolling out the June 2018 security patch updates for its Galaxy J2 2018 device. The latest update bumps the new build number J250FDXS2ARF4 to the phone. In this post, we will guide you to install the J250FDXS2ARF4 June security update on your Galaxy J2 2018. June 2018 update fixes up a number of CVEs and other security threats. for detail information about the security threats, check out the Google Android security bulletin for June 2018. The update is based on Android 7.1.1 Nougat.
The J250FDXS2ARF4 June 2018 security update for Galaxy J2 2018 is moving over the air. You can wait for the notification from your device to install it when it knocks into your phone. Alternatively, you can also manually download and flash the firmware that brings the J250FDXS2ARF4 software using the Odin Tool. Below you can find the firmware file for Galaxy J2 2018.
Talking about the device specs, Samsung Galaxy J2 2018 features a 5-inch qHD Super AMOLED display with a screen resolution of 540 x 960 pixels. The smartphone is powered by Qualcomm Snapdragon 425 processor coupled with 1.5 GB of RAM. The phone packs 16GB internal memory which can also be expanded via microSD card. The camera on the Samsung Galaxy J2 2018 comes with the 8MP rear camera and 5MP front shooting camera. Samsung Galaxy J2 2018 came out of the box with Android 7.1.1 Nougat.
We recommend you to upgrade your Galaxy J2 2018 to the latest security patch to keep safe from security vulnerabilities, malware, and virus.
How to Check Software Update on Galaxy J2 2018?
If the OTA doesn’t show up, you can manually search for it. Simply go to device Settings > About phone > Software updates > Check for Updates. If the latest software update is available then download and install it. Connect to a good Wi-Fi network to download the update as it is a large file. Also, make sure to have a full battery charge on your phone. A low battery will stall the update installation process.
Steps to Install J250FDXS2ARF4 manually:Watch The Video on How to install Stock Firmware on any Samsung Galaxy devices using ODIN
If you have not received the OTA update, then make sure your device is not rooted or installed any custom ROM. You can always follow this simple guide to update manually by using ODIN Software. Follow the complete instruction to install new update on Samsung Galaxy J2 2018.
Required Download Files
Required Odin and Drivers:
- Download and Install Samsung Kies Software
- Make sure to download Samsung USB Drivers and install it on your PC.
- Click to Download ODIN Software
- This ROM is supported for Galaxy J2 2018 [SM-J250F]
- Download the required firmware and drivers.
- Your device must have 50% – 70% Battery.
- You need PC or Laptop to install this firmware.
- Take a Full Backup on your phone before Installing any new firmware. So make sure you have data’s in case if something Wrong (This Process won’t lose your data).
- You need to Enter Samsung Download Mode.
- Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage.
Instructions to Install Using ODIN
To install the firmware, you must first download the required software and drivers on your PC. By following the below link, you can upgrade the OS version to J250FDXS2ARF4 on Galaxy J2 2018 SM-J250F.
I hope this guide was helpful to install June 2018 Security Patch on Galaxy J2 2018 based on Android 7.1.1 Nougat.