Download Install April Security J320FXXU0AQC3 On Galaxy J3 2016

Advertisements

Most of the Samsung Devices have been updated recently with March Security Patch, today Samsung has started seeding a new firmware update for Galaxy J3 2016 which comes with April Security Patch. The latest OTA comes with build number J320FXXU0AQC3 for Galaxy J3 2016. If you are running the Stock Marshmallow on Samsung Galaxy J3 2016, then you will receive the notification anytime soon on your device. The update is sent via OTA (Over the air) to all Galaxy J3 2016 in Phase wise manner.

The latest build J320FXXU0AQC3 comes with April Security Patch, fixes several bugs and improves the stability and performance of the device. The update is still based on Android 6.0.1 Marshmallow. Now you can enjoy the latest Android 6.0.1 Marshmallow for Galaxy J3 2016 SM-J320F by following the below step by step guide to flash latest April Security Marshmallow ROM on Galaxy J3 2016 J320F.

Download Install April Security J320FXXU0AQC3 On Galaxy J3 2016

In our guide, you can either follow any of the three method to get J320FXXU0AQC3  Stock Marshmallow update on Galaxy J3 2016 J320F. You can use OTA, Kies or even the ODIN to update J320FXXU0AQC3 firmware on Samsung Galaxy J3 2016.

Advertisements

In case if you don’t want to update via ODIN, then If you are Still waiting for the update and you not yet received any notification, then follow the simple step below to see if you have received the update.

To Check for latest Update, Go to Settings -> About Phone -> Software Updates.

If you have the update then press download and upgrade the OTA to Android 6.0.1 Marshmallow. If you didn’t receive and you still want the update, then don’t worry. You can Update Galaxy J3 2016 to Android Marshmallow manually by following the below steps. So read the steps carefully to Update Galaxy J3 2016 J320F to Marshmallow.

Yes, today i will guide you on How to Update Build J320FXXU0AQC3 based Marshmallow for Samsung Galaxy J3 2016. Remember, Below guide is to update full OTA firmware file on Galaxy J3 2016 J320F.

ALSO RELATED POST : 

PRE-REQUISITE :

  • Remember : This guide is to Install April Secuity Patch update on Galaxy J3 2016 J320F (J320FXXU0AQC3).
  • Your device must have 70% Of battery
  • You need a Laptop or PC to perform this Action
  • You should be using Stock Firmware and not Custom ROM
  • Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
  • Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED :

  • Download and Install the Samsung Kies Software : CLICK HERE or
  • Download and Install the SamsungUSB Drivers : CLICK HERE
  • Download and Extract the ODIN ZIP file on Desktop : CLICK HERE
DOWNLOAD FULL OTA ROM for Samsung Galaxy J3 2016

Steps For How To Install J320FXXU0AQC3 Stock Marshmallow for Samsung Galaxy J3 2016 J320F .

  1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
    • First of all, enable the USB Debugging
    • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled
    • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging 
  2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator odin
  3. Now Reboot your Phone into Download Mode
  4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
  5. Now Connect your Phone to PC using the USB Cables
  6. When you connect the USB cable you will see a blue sign in Odin odin blue sign
  7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button ap pda
  8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)repartition odin
  9. Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.

That’s ALL! When you restart your Phone , Your Galaxy J3 2016 J320F to J320FXXU0AQC3 update. Enjoy!

Advertisements

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.