Samsung was in news last year for introducing the Go Edition budget devices. we know these are phones that use minimal hardware but make use of lightweight Android OS(Android Go). One such device is the Galaxy J4 Core. Hopefully, along with its flagships, the Korean company is also rolling out timely software support for its budget devices. Speaking of which the Galaxy J4 Core is currently receiving the February 2019 security patch update. it comes with the build number J410FXXU1ASB1.
The software is currently rolling out in the UAE as an over-the-air update(OTA). Thought most of the users will await the software to knock automatically to the device, some may not receive it immediately. Obviously, OTA seed in phases. So, those who do not get their hands on the OTA can immediately upgrade their device by manually downloading and flashing the firmware. We have put up the firmware download link and installation guide. Check it out below.
How to Catch the OTA.?
February 2019 security update for the Galaxy J4 Core in UAE is rolling over-the-air which follows an automatic process. It will drop into the devices on its own and users will get notified to install the same. However, depending upon factors like geographical location and tele-carrier support, some users may not get to see the update soon. So, you should capture the OTA manually. This is a very easy method.
- Go to your phone Settings > System Update
- Tap on Check for Latest Updates
- If the J410FXXU1ASB1 update is available, then download and install it
The OTA software file size is big. So, we suggest you download the update by connecting to a good Wi-Fi network. It will also save you getting charged for carrier’s data spent. Charge the battery of your device up to 70% before installing the new update. This will help to avoid any low-power related interruptions during installing the OTA.
Download J410FXXU1ASB1 Firmware
If you could not capture the OTA automatically as stated above, then You can download and install the stock firmware which brings the February 2019 patch for the device. You have to manually use the flash tool, Odin to install. Here we have put up the download link for the firmware which packs the latest security patch for Galaxy J4 Core in UAE.
- Device Name: Samsung Galaxy J4 Core
- Model: SM-J410F
- Region: UAE
- Baseband Version: J410FXXU1ASB1
- Security Patch Level: 2019-02-01
- Software Supported: ODIN Tool
- Android OS: 8.1 Oreo (Go Edition)
How to Install Latest Software Update on Galaxy J4 Core
Download the firmware that packs Android Pie from the link above followed by all the Samsung USB drivers and other flash tools. You have to use the Odin tool to install the new stock firmware on the Galaxy J4 Core. We have also put up the guide which will help you install Android Pie firmware on your J4 Core. Check the basic guidelines before you begin to install the new firmware.
- This Android Pie based firmware is exclusively for Galaxy J4 Core. Do not use it on other devices.
- Charge your device’s battery up to 50% or more before performing the update.
- A PC/Laptop
- Take a Full Backup on your phone before installing any new firmware.
- You must install Samsung USB Drivers on your PC.
- Download and Install Samsung Kies software.
- You need to Enter the Samsung Download Mode.
Stock Firmware Installation Guide
Here is the guide on using the Odin tool to install the latest software update on the Galaxy J4 Core in UAE.
So, that’sit folks. If you are in UAE using the budget-friendly Android Go powered Galaxy J4 Core, then make sure to install this J410FXXU1ASB1 update.