Leagoo Power 2 launched on August 2018. If you have bought this device and wants to connect it to PC which is obvious, then this post simply enables you to download the latest Leagoo Power 2 USB Drivers for Windows 7, 8 and 10 very simply.
Talking about the specifications, Leagoo Power 2 features a 5-inch IPS display with a screen resolution of 1280×720 Pixels. It is powered by MediaTek MT6580A, 32-bit Processor coupled with 2GB of RAM. The phone packs 16GB internal memory with an expandable storage support of 32GB via microSD card. The camera on the Leagoo Power 2 comes with a dual 8MP + 2MP rear camera with dual-LED dual-tone flash and 5MP front camera for selfies. It is backed by a Non-Removable 3200 mAh Lithium-Polymer Battery. Leagoo Power 2 also has a fingerprint sensor on the back.
It is very necessary to have USB drivers whenever you have to connect Leagoo Power 2 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Leagoo Power 2 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Leagoo Power 2 USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Table of Contents
Leagoo Power 2 USB drivers
The USB driver makes almost every task which needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Leagoo Power 2 from your PC in case you have installed it. Once you are done, Click the below link to download USB Drivers on your PC.
Download Latest USB DriversYou must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download double tap on the file and follow the instructions on the screen.
How to Install Leagoo Power 2 Latest USB Drivers
You can download and install Leagoo Power 2 USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.
Leagoo Power 2 MediaTek VCOM Drivers
The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver which will recognize your Leagoo Power 2 when you connect it to PC. As we said, Leagoo Power 2 is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etc
Download MediaTek USB VCOM DriversDownload SP Flash tool for Leagoo Power 2
Did your phone get into boot loops or did you brick your Leagoo Power 2 by messing up with its software? Then the simple solution is installing a Stock ROM file on Leagoo Power 2. One day you might end up with a bricked phone. When it happens, SP Flash tool comes in handy. SP Flash tool (also known as Smartphone flash tool) is a which windows / Linux application that offers total control over your smartphone. It means that you can have full access to modify and align the internal files according to your liking. The application only supports the Mediatek smartphones.
By using SP flash tool, you even install a Custom Recovery, install Custom Kernel and also root your phone.
Download MediaTek USB VCOM DriversLeagoo Power 2 ADB Fastboot Tool:
If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.
Download ADB and Fastboot toolWhat is ADB?
ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.
What is Fastboot:
Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.
Instructions to Install:
You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.