How to Install Lineage OS 17.1 for Hotwav Pearl K2 | Android 10 [GSI treble]

Updated on April 25, 2020 by GDT Staff

Advertisements

Hotwav Pearl K2 was launched in the year 2019 with Android 9.0 Pie out of the box. If you are looking for a new custom ROM for the device, then you are in the right place. Today, we will guide on how to install Lineage OS 17.1 on Hotwav Pearl K2 based on Android 10 GSI. Well, after the Android 8.1 update, most of the devices that came out officially supports the GSI.

Well, GSI stands for Generic System image which is an unmodified Android Open Source Project (AOSP) code, runnable on a variety of Android devices that has treble support. If you are using the Hotwav Pearl K2, then you can follow this guide to install the Lineage OS 17.1 on your device. As we already said, this build is based on Android 10, which is Google’s 10th version of Android OS with plenty of new features and system UI changes.

Thanks to the XDA Recognized Contributor AndyYan for sharing this Lineage OS 17.1 on XDA Forum. To install this, you need to unlock your device bootloader and you can use either ADB fastboot method or TWRP Method (if available).

Table of Contents

1 Hotwav Pearl K2 Specifications: Overview
2 What’s on the Android 10 version?
3 Lineage OS 17.1: Android 10 Build
4 Steps to Install Lineage OS 17.1 ROM on Hotwav Pearl K2

Hotwav Pearl K2 Specifications: Overview

Hotwav Pearl K2 was announced in July 2019 which sports a 6.26-inch IPS LCD display with a screen resolution of 1520 x 720 pixels with 269 PPI pixel density. The device is protected by a 2.5D curved glass screen.

Hotwav Pearl K2 is powered by a MediaTek MT6739WW chipset coupled with 3GB of RAM and 32GB of internal storage. It also supports an external memory card. The device came out of the box with Android 9.0 Pie and backed by a 3150 mAh battery (Non-removable).

As far as the camera concerned, the device has a single-camera setup with 13MP primary sensors and a selfie camera with a 5MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Hotwav Pearl K2 comes with a rear fingerprint sensor feature.

What’s on the Android 10 version?

Google has officially unveiled the latest version of Android OS called Android 10. The update is already going live for Pixel series devices. It brings plenty of new features to the device system like system UI, new gesture navigation, improved privacy and location control. The update also offers enhanced app permissions, foldable display support, security features, system-wide dark mode, etc.

The Android 10 also offers built-in call screening, multi-camera API, smart replies in the notification panel, 5G support, improved call quality, bubble feature, live caption, and more. While the latest version also improves battery life, Focus mode which is similar to the Do Not Disturb mode, etc. Apart from that Android 10 also features 65 new emojis. It also comes with direct audio streaming support to hearing aid devices.

Advertisements

Lineage OS 17.1: Android 10 Build

Lineage OS is an open-source and free operating system that is based on the Android platform. It is the successor to the custom MOD, the CyanogenMod, which shut down its operation in December 2016. However, Cyanogen. Inc retained the rights to the custom MOD and gave a rebranding to it as Lineage OS.

Advertisements

Well, LineageOS 17 will be based on the latest Android 10 and it comes with all the Android 10 features and Lineage customization options which allows users to be more advanced. Now you can enjoy Lineage OS 17.1 on Hotwav Pearl K2 by flashing this custom ROM.

Steps to Install Lineage OS 17.1 ROM on Hotwav Pearl K2

First, unlock the Hotwav Pearl K2 bootloader and flash the latest TWRP Recovery if your device is supported. Here we have mentioned all the requirements and download links to flash the Lineage OS 17.1 on Hotwav Pearl K2.

Disclaimer:

LineageOS 17 GSI build is based on PHH’s AOSP Android 10 GSIs which is still marked as a pre-release. Even on a device that runs Pie GSIs nicely, it’s still possible to get broken media, camera, RIL or even flat-out no-boot. You are strongly advised to try PHH’s original and then identify/report issues there, before moving onto other GSIs that is based on his work. Please report bugs here only if it’s specific to this GSI.

We’re at GetDroidTips won’t be responsible for any kind of damage or error that occurs to your handset while or after following this guide. This is a Custom ROM and may contain some of the bugs or stability issues. We can’t recommend you to use this firmware as your daily driver. Proceed at your own risk.

Pre-Requirements:

Lineage OS 17.1 GSI Treble build is supported on Hotwav Pearl K2.
You will require to unlock the device bootloader at first
ARM, ARM64, or x86: Check your Android Phone’s Processor
Treble Support: Check If Your Smartphone Supports Project Treble
Download the required TWRP file, LineageOS 17 zip file, and Supported GApps file from below.
Keep your device battery charged up to 60% at least for a smoother process.
Take a complete backup of your device data without Root. In case anything goes wrong, you can easily restore all the data.

Note:

A only arm32 – arm avN
A only arm64 – arm64 avN
A/B arm64 – arm64 bvN
A/B arm32 – arm bvN

Download Links:

Lineage OS 17.1 Download – If broken link, check official forum
Download Lineage OS 17.1 Gapps | Open Gapps 10 or Android 10 Gapps
Download and install Hotwav USB Drivers
For adb method: Download ADB and Fastboot tool

Instructions to Install:

Guide to install Generic System Image (GSI) on your Android device

We hope that this guide is helpful to you and you have successfully installed the Lineage OS 17.1 on your Hotwav Pearl K2 handset easily. If in case anything goes wrong or if you have any queries, feel free to ask in the comments below.

Source: XDA | Credits to AndyYan

Related Articles: