M107FXXU4BTJ4 | October 2020 Patch for Galaxy M10S (India)

On this page, we will share the October 2020 security patch for the Galaxy M10S with build number M107FXXU4BTJ4. The update is live in India region. This update is based on Android 10 and brings no major changes except the security patch.

Check Software Update on Galaxy M10S:

You will get this software update on your Galaxy M10S as an OTA (over the air). If you haven’t received it yet, then check for the OTA update manually by following this:

Settings > Software Update > Tap on Download and Install if you find the new build number M107FXXU4BTJ4.

Before upgrading, make sure you have enough juice (battery backup) on your Galaxy M10S and connected to a good WiFi network. If there is no new update, then follow this guide to manually install the firmware on your Galaxy M10S.

How to Install October 2020 Patch on Galaxy M10S

In order to flash the firmware manually on your Samsung Galaxy M10S device, then you need to download the ODIN flash tool, firmware file, and drivers.

Pre-Requirements:

• This firmware (M107FXXU4BTJ4) is only supported for Samsung Galaxy M10S.
• Charge your device to 50% in order to avoid power-related interruptions during the installation process.
• You need a PC and USB Cables.
• Take a backup before flashing the software on your device.

Firmware Installation Guide:

• Download the ODIN Flash Tool on your PC
• Make sure to download the new firmware and move it to the desktop
• Open the ODIN and select the firmware file to flash it.
• To know the process, read our guide on how to flash Samsung firmware using Odin
• Also, check out our video tutorial.

I hope this guide was helpful to install the October 2020 security patch (M107FXXU4BTJ4) on Galaxy M10S.