Advertisements

N986BXXU1DUC8 | March 2021 Patch for Galaxy Note 20 Ultra 5G (Global)

Today Samsung Galaxy Note 20 Ultra 5G received the March 2021 security patch with software build number N986BXXU1DUC8. This update is based on Android 11 and brings nothing new except the security patch fixes.

According to folks at Sammobile, this update fixes the five critical-risk vulnerabilities found in the Android OS, along with dozens of moderate and high-risk vulnerabilities. It also fixes 21 vulnerabilities discovered in Samsung’s software.

Galaxy Note 20 Ultra

Check Software Update on Galaxy Note 20 Ultra 5G:

You will get this software update on your Galaxy Note 20 Ultra 5G as an OTA (over the air). If you haven’t received it yet, then check for the OTA update manually by following this:

Settings > Software Update > Tap on Download and Install if you find the new build number N986BXXU1DUC8.

Before upgrading, make sure you have enough juice (battery backup) on your Galaxy Note 20 Ultra 5G and connected to a good WiFi network. If there is no new update, then follow this guide to manually install the firmware on your Galaxy Note 20 Ultra 5G.

Firmware Detail:

  • Device Name: Samsung Galaxy Note 20 Ultra 5G (SM-N986B)
  • Region: Global
  • Build Number: N986BXXU1DUC8
  • Android OS Version: Android 11
  • Software Supported: ODIN Tool
  • Android Security Patch Level: 2021-03-01

How to Install March 2021 Patch on Galaxy Note 20 Ultra 5G

In order to flash the firmware manually on your Samsung Galaxy Note 20 Ultra 5G device, then you need to download the ODIN flash tool, firmware file, and drivers.

Pre-Requirements:

  • This firmware (N986BXXU1DUC8) is only supported for Samsung Galaxy Note 20 Ultra 5G.
  • Charge your device to 50% in order to avoid power-related interruptions during the installation process.
  • You need a PC and USB Cables.
  • Take a backup before flashing the software on your device.

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Download Links:

Firmware Installation Guide:

  1. Download the ODIN Flash Tool on your PC
  2. Make sure to download the new firmware and move it to the desktop
  3. Open the ODIN and select the firmware file to flash it.
  4. To know the process, read our guide on how to flash Samsung firmware using Odin
  5. Also, check out our video tutorial.

I hope this guide was helpful to install the March 2021 security patch (N986BXXU1DUC8) on Galaxy Note 20 Ultra 5G.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.