Download Install March Security J710MNUBU2AQC1 On Galaxy J7 2016

Most of the Samsung Devices have been updated recently with March Security Patch, and today we have another Smartphone which receives March Security Patch update. Today Samsung has started seeding a new firmware update for Galaxy J7 2016. The latest OTA comes with build number J710MNUBU2AQC1 for Galaxy J7 2016. If you are running the Stock Marshmallow on Samsung Galaxy J7 2016, then you will receive the notification anytime soon on your device. The update is sent via OTA (Over the air) to all Galaxy J7 2016 in Phase wise manner.

The latest build J710MNUBU2AQC1 comes with March Security Patch, fixes several bugs and improves the stability and performance of the device. The update is still based on Android 6.0.1 Marshmallow. Now you can enjoy the latest Android 6.0.1 Marshmallow for Galaxy J7 2016 SM-J710M by following the below step by step guide to flash latest March Security Marshmallow ROM on Galaxy J7 2016 J710M.

In our guide, you can either follow any of the three method to get J710MNUBU2AQC1 Stock Marshmallow update on Galaxy J7 2016 J710M. You can use OTA, Kies or even the ODIN to update J710MNUBU2AQC1 firmware on Samsung Galaxy J7 2016.

In case if you don’t want to update via ODIN, then If you are Still waiting for the update and you not yet received any notification, then follow the simple step below to see if you have received the update.

To Check for latest Update, Go to Settings -> About Phone -> Software Updates.

If you have the update then press download and upgrade the OTA to Android 6.0.1 Marshmallow. If you didn’t receive and you still want the update, then don’t worry. You can Update Galaxy J7 2016 to Android Marshmallow manually by following the below steps. So read the steps carefully to Update Galaxy J7 2016 J710M to Marshmallow.

Yes, today i will guide you on How to Update Build J710MNUBU2AQC1 based Marshmallow for Samsung Galaxy J7 2016. Remember, Below guide is to update full OTA firmware file on Galaxy J7 2016 J710M.

ALSO RELATED POST :

How To Install Bixby on Any Samsung Smartphones
Official Unofficial Lineage OS 14.1 Device List and Download Link
How to Download and Install Android ADB and Fastboot tool on Mac!!

PRE-REQUISITE :

Remember : This guide is to Install March Secuity Patch update on Galaxy J7 2016 J710M (J710MNUBU2AQC1).
Your device must have 70% Of battery
You need a Laptop or PC to perform this Action
You should be using Stock Firmware and not Custom ROM
Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED :

Download and Install the Samsung Kies Software : CLICK HERE or
Download and Install the SamsungUSB Drivers : CLICK HERE
Download and Extract the ODIN ZIP file on Desktop : CLICK HERE

DOWNLOAD FULL OTA ROM for Samsung Galaxy J7 2016

Steps For How To Install J710MNUBU2AQC1 Stock Marshmallow for Samsung Galaxy J7 2016 J710M .

If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
- First of all, enable the USB Debugging
- To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator
Now Reboot your Phone into Download Mode
So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
Now Connect your Phone to PC using the USB Cables
When you connect the USB cable you will see a blue sign in Odin
Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.