Advertisements

Easy Method To Root Advan S6 Plus Using Magisk [No TWRP needed]

In this guide, we will share with you steps to Root Advan S6 Plus Using Magisk without any custom recovery or TWRP recovery. Rooting is the process of allowing users of smartphones, tablets and other devices running the Android operating system to get superuser control over the system. It offers administrative power and permissions to change or customize the system apps or settings easily.

The smartphone OEMs doesn’t provide you an option to enable root access on your device easily by default. You need to do it via some tweaks. Improper rooting steps or guide may void your device warranty and can brick your device as well. So, take a full backup of your device before doing anything. So, if you’re an Advan S6 Plus device user which runs on MediaTek chipset and wants to enable root access on your device. Then you’re in the right place.

Easy Method To Root Advan S6 Plus Using Magisk [No TWRP needed]

Steps To Root Advan S6 Plus Using Magisk

Remember that the files and guide are for Advan S6 Plus device only. Do not use it on any other device. Follow all the guide mentioned here properly.

Pre-Requirements:

  • Keep your device battery charged up to 50% for a smoother process.
  • As we mentioned earlier, take a full backup of device data (Internal Storage, SMS).
  • A Windows or Mac PC/Laptop also necessary to complete the flashing process.
  • A USB cable is required to connect your device with the computer.

Download Links:

We are at GetDroidTips will not be responsible for any issue occurred to your device during or after following this guide. Do it at your own risk.

Extract and Patch Boot.image using Magisk

  • After downloading the Stock ROM, extract it to your PC.
  • Connect your device via USB cable and copy the boot.img file only from the extracted folder to your device storage.
  • Open the Magisk Manager on your device. Select Install and again select install.
  • Now, tap on ‘Patch Boot Image File’.Install patched boot image TWRP
  • Go to storage where you have moved the image file earlier.
  • Now, wait for a couple of seconds and Magisk will start patching the boot image.
  • Once the boot image is patched, copy the ‘patched_boot.img’ from the internal storage and replace it in the same extracted ROM folder on your PC.

Now, follow the second step to flash the patched boot image file.

How To Install the Patched Boot Image on Advan S6 Plus

  • Install the QPST package on your PC and run QFIL. Select Flat build, then navigate the programmer path to your ROM folder. Select the prog_emmc_ufs_firehose_Sdm660_ddr.elf as your programmer path. Next, load XMLs RawProgram0.xml and patch0.xml.
  • Let’s begin by booting our phone into emergency download mode.
  • To boot into emergency download mode, you need to press and hold Shift Key and Right Click button on the mouse in the empty space. You will see the below dialog box popping up.
  • Click on Open Powershell Window or Command window here. Basically, the command prompt opens up upon clicking.
  • Type the adb command to boot your phone into emergency download mode
    adb reboot edl
  • QFIL should go from ‘No Port’ to ‘Qualcomm HS-USB QDLoader 9008’.
  • Immediately after you see this pop-up, select ‘Download’. This will completely reset your device.
  • If flashing was successful, wait a bit then boot your device. You should see a little warning complaining that the software has been altered. Wait a little bit more. You can install magisk manager at this point if it didn’t show up after the flash. Reboot the device again.
  • That’s it! You should have a rooted device now.

In some cases, if the above method doesn’t work on your Advan S6 Plus, then try via ADB fastboot method.

  • After extracting ADB fastboot tool, you must move the patched boot image to the same folder. Hold the SHIFT key and click on the right mouse button to open the command window/PowerShell.
  • Next, enter the following command:
    • Flash the “patched_boot.img” to install Magisk and root your Android device:
      fastboot flash boot patched_boot.img
    • For devices with A/B partition system, use the following commands:
      fastboot flash boot_a patched_boot.img
      
      fastboot flash boot_b patched_boot.img

      Please replace [patched_boot.img] with the name of the boot image file you downloaded followed by the .img extension.

  • The flashing process will begin. Once done, run
    fastboot reboot
    
    

How to Verify if your phone has a systemless root?

  1. Download and install the Magisk Manager app APK, and launch it.
  2. To verify that you have systemless root, check the top of the screen and if you see all option with Green Tick which means you have successfully rooted and bypassed SafteyNet.Magisk Status Check

So, that’s it. Now that you have rooted your Advan S6 Plus, you can try this out. If you have any queries regarding this, do let us know.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.