How To Root And Install TWRP For LENOVO A2010

Do you want to install Custom Recovery on LENOVO A2010-a? Here is our full guide on How to Root and Install TWRP For LENOVO A2010-a. TWRP Recovery is a Custom Recovery which is also known as TeamWin Recovery built with a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.

How To Root And Install TWRP For LENOVO A2010

This is a guide to Install latest TWRP for LENOVO A2010-a. This is a guide to Install latest TWRP for LENOVO A2010-a. The TWRP Recovery has a material design, so Now you can install Material Designed TWRP 3.0 for LENOVO A2010-a. Download the TWRP Recovery for LENOVO A2010-a today and Read the steps below. This is not an official TWRP Recovery for LENOVO A2010-a from TWRP Team. If you install any Custom Recovery on LENOVO A2010-a, you can install Custom ROM, Custom Mods, Custom Kernels or any zip file such as Xposed. Read the guide carefully on How to Root and Install TWRP For LENOVO A2010-a.

Before doing the methods, I just want to warn you that, By doing this you will loose the warranty and I’m not responsible if you damage your phone or brick your device. 


  • This TWRP is for LENOVO A2010-a with MT6735M
  • You need a Laptop or PC.
  • Charge your phone to at least 70%.
  • Back up your device just in case if you need it later.
  • Download for Driver for Preloader USB VCOM mode and Install it on your Computer (still compatible with MT67xx phones) (Install correctly Mediatek Preloader drivers before using Flashtool (Watch the video on How to install)
  • Download SP FlashTool (win) – CLICK HERE and extract it on your computer.
  • Download for root and Move it to internal memory on your phone.
  • Download TWRP Recovery : CLICK HERE.

Steps for How to Root and Install TWRP for LENOVO A2010-a

  1. First of all download the all needed file from above link.
  2. Now Extract the file and install the Preloader VCOM drivers by running the InstallDriver.exe file.
  3. Download SP FlashTool (win) – CLICK HERE , extract it on your computer and run the flash_tool.exe file.spflashtool
  4. Now Download the TWRP Zip which also contains Scatter file
  5. Now in the flash tool click on the scatter file, find the scatter file in the extracted foldersp-flash-tool
  6. Leave only the recovery line checked(Ticked), then double click on its Location field and browse for your device-specific custom recovery image file.sp_choose_recovery
  7. Click on the Download button (No 6 in the image )and connect your phone to a USB port of your computer. The flashing process will start automatically and it needs just a few seconds.*
  8. Now the custom recovery has been flashed. You may remove the USB cable.
  9. To enter recovery, you need  to boot in android, activate developers option menu, activate debug usb and use ADB commands to reboot in recovery mode:
  10. You can boot your phone into recovery by powering it on while pressing the volume up button.

How to Root LENOVO A2010-a with TWRP

  • You may have downloaded the SuperSu zip file from the section above what you need, If not – CLICK HERE to Download SuperSU.
  • Now move the SuperSu zip file to the root of your internal memory.
  • Boot your phone into recovery by pressing “Volume Down + Power” button simultaneously.
  • In TWRP Recovery, Click the INSTALL menu and Browse and Select the SuperSu Zip. TWRP recovery
  • Now Swipe to Install SuperSu.
  • Yes, Now the root must be working if you properly installed.
  • To verify, Go to Google Play and download the Root Checker app to check the root status. If root checker app says root access available then Enjoy you have root on your LENOVO A2010-a Smartphone.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.