Advertisements

How To Root Install TWRP For Samsung Galaxy Ace Style

This guide is to Root and install Official TWRP for Samsung Galaxy Ace Style. Only SM-G310HN is unofficially supported with TWRP 3.0.2.0. Follow the steps below on How to Root and Install Official TWRP for Samsung Galaxy Ace Style.

How To Root Install TWRP For Samsung Galaxy Ace Style

Here is our full guide on How to Install Official TWRP for Samsung Galaxy Ace Style 2016. TWRP Recovery is a Custom Recovery which is also known as TeamWin Recovery built with a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.

If you don’t know about TWRP, TWRP Recovery is a Custom Recovery, any handset you buy will come on Stock Recovery which will restrict you from enjoying Flashing any Custom ROM or Updates on your android device. TWRP Recovery helps you in Installing CUSTOM ROM, Mods, or kernel on your device. To install TWRP for Samsung Galaxy Ace Style, you need Unlocked Bootloader first. So please unlock and then follow this guide to Install Official TWRP for Samsung Galaxy Ace Style.

Shared By XDA Member mac12m99 on XDA Forum

Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy Ace Style SM-G310HN supported with unofficial TWRP.

Before doing the methods, I just want to warn you that. By doing this, you will loose the warranty and sometime if you don’t read the steps and do something wrong can brick your device. So be careful

RE-REQUISITE :

  • Remember this step is about How to Install Official TWRP for Samsung Galaxy Ace Style with SM-G310HN
  • Your phone must have 70% Of battery
  • You need a Laptop or PC to perform this Action
  • Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
  • Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your phone.

DOWNLOAD THE FILES THAT REQUIRED :

Steps for How to Install Official TWRP for Samsung Galaxy Ace Style

  1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
    • First of all, enable the USB Debugging
    • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled
    • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging 
    • Also Enable OEM Unlocking by Going into Settings -> Developer Options -> Toggle OEM Unlocking
  2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator (If there is a pop-up regarding Installing ADB drivers let it finish, it usually updates)odin
  3. Now Reboot your phone into Download Mode
  4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
  5. Now Connect your phone to PC using the USB Cables
  6. When you connect the USB cable you will see a blue sign in Odin (also make sure the COM : xx (xx is usb port number it can be any number so don’t worry about it, just verify COM is lit up)odin blue sign
  7. Add the Recovery TWRP .tar file which you downloaded from Above by Clicking AP/PDA Button and load it inside itap pda
  8. Now Make sure re-partition is NOT ticked – Go to Option and see repartition odin
  9. Also, Uncheck the Auto Reboot if you installing for the first time
  10. Click the start button, sit back and wait few seconds until you see a message pass. Once you see PASS
  11. Restart the phone into recovery by Holding  POWER + HOME + VOL DOWN.
  12. Voila! Now you have a TWRP Recoveryon your phone.

How to Root Samsung Galaxy Ace Style with TWRP

  • You may have downloaded the SuperSu zip file from the section above what you need, If not – CLICK HERE to Download SuperSU.
  • Now move the SuperSu zip file to the root of your internal memory.
  • Boot your phone into recovery by pressing “Volume Down + Power” button simultaneously.
  • In TWRP Recovery, Click the INSTALL menu and Browse and Select the SuperSu Zip. TWRP recovery
  • Now Swipe to Install SuperSu.
  • Yes, Now the root must be working if you properly installed.
  • To verify, Go to Google Play and download the Root Checker app to check the root status. If root checker app says root access available then Enjoy you have root on your Samsung Galaxy Ace Style.

SOURCE

Comments

  1. Why that file “TWRP from TWRP Website” did not working? The enlargement is .img, but in this huide, quietly near writes “.tar file” for Odin. Whats wrong? Finally Odin stopped on “Reset!” and operation was undone. Phone works still, but in 3e recovery. What i do wrong?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.