Easy Method to Root Walton Primo S7 using Magisk without TWRP

If you’re a Walton Primo S7 user and want to enable root access on your device, then you’re in right place. Here in this guide, we will help you to Root Walton Primo S7 using Magisk without TWRP recovery with all the requirements and step-by-step process.

Most of the Android user loves to customize their smartphones due to its open-source nature. Users mostly perform flashing custom firmware, installing a custom recovery, flashing custom modules, or rooting as well. By gaining the superuser access on your Android device, you can easily tweak or customize your device UI, edit/change system settings, removing bloatware, etc that can’t be possible without rooting.

In order to root your device, we will use Magisk to patch the stock boot image file and flash it on the boot partition of your device. This process will enable root access on your device without affecting the system partitions. Magisk will also hide the security detections like Google SafetyNet, enterprise/bank system integrity checks, game tamper checks, etc.

Easy Method to Root Walton Primo S7 using Magisk without TWRP

Now, let’s take a quick look at the device overview below:

Walton Primo S7 Device overview:

Walton Primo S7 was announced in July 2019 which sports a 6.26-inch IPS LCD display with a screen resolution of 1520 x 720 pixels with 218 PPI pixel density. The device is protected by a 2.5D curved glass screen.

Walton Primo S7 is powered by a MediaTek Helio P22 (MT6762) chipset coupled with 4GB of RAM and 32GB of internal storage. It also supports an external memory card. The device came out of the box with Android 9.0 Pie and backed by a 3900 mAh battery (Non-removable).

As far as the camera concerned, the device has a Triple-camera setup with 12MP + 13MP + 2MP primary sensors and a selfie camera with a 16MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Walton Primo S7 comes with a rear fingerprint sensor feature.

Steps To Root Walton Primo S7 Using Magisk

Follow the full depth guide along with requirements and download links below.

Keep in mind:

  • Rooting may void the manufacturer’s warranty on your device.
  • Rooting will block the firmware OTA updates.

Now, let’s head over to some of the necessary steps which you need to abide by:


  • Your phone should have battery juice more than 60% at least.
  • Keep a backup of your device data at first. Therefore, if anything goes wrong, you can get back the important data.
  • The image file in this article is supported by the Walton Primo S7 model only. DO NOT try to flash it on other models.
  • You will also require a PC/Laptop and a USB cable in order to connect your device with the computer.
  • You should download all the necessary files, tools, and drivers from below accordingly.

Required Downloads:


We’re at GetDroidTips won’t be responsible for any kind of error or damage that occurs to your phone during or after following this guide or flashing any file. You should know what you’re doing. Take a full backup at first and proceed at your own risk!

1. Steps to Extract and Patch Boot.image using Magisk

  • First of all, you will need to download the Stock ROM from above and extract it to your PC.
  • You need to extract the boot image using the MTK Droid Tool
  • Next, connect your device via a USB cable and copy the boot.img file only from the extracted ROM folder to your device storage.
  • Launch the Magisk Manager app on your phone. It will open a popup that will ask you to install Magisk.
  • Choose the INSTALL option and select Install again.
  • Next, tap on the “Patch Boot Image File”.
    Install patched boot image TWRP
  • Head over to the internal storage and select the boot image file of your device that you’ve moved earlier.
  • You need to wait for a while and Magisk will start patching the stock boot image.
  • Once the boot image has been patched completely, you have to copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.

Now, you’re ready to follow the second step to flash the patched boot image file.

2. Steps To Install the Patched Boot Image on Walton Primo S7

Follow the proper guide to install Patched Boot Image on Walton Primo S7 from below link:

Guide to Install Patched Boot Image on MediaTek Device

In some cases, if the above method doesn’t work on your Walton Primo S7, then try via ADB fastboot method.

  • Now, extract the ADB & Fastboot tool, then move the patched boot image file to the same folder.
  • Press and hold down the Shift key + right-mouse-click to open the command window/PowerShell.
  • Next, enter the following command in order to flash the “patched_boot.img” to install Magisk and root your Android device:
fastboot flash boot patched_boot.img
  • For devices with A/B partition system, you have to use the following commands:
fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Please replace [patched_boot.img] with the name of the boot image file you downloaded followed by the .img extension.

  • Wait for the flashing process to complete.
  • Finally, type in the command to reboot your device.
fastboot reboot
  • Done.

Steps to Verify the Systemless Root

  1. Launch the Magisk Manager app on your device.
  2. Now, in order to verify the systemless root access on your phone, you will see the status screen. Here all options should be green ticked if properly rooted. If yes, that means you’ve successfully bypassed the Google SafetyNet measure as well.Magisk Status Check

That’s it, guys. We hope that you’ve found this guide useful and have successfully rooted your Walton Primo S7 device. For any queries, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.