How to Install Stock Firmware on Blackview BV4000 Pro [Back to Stock ROM]

Blackview BV4000 Pro features 2GB of RAM and 16GB ROM which was launched in November 2017 with a 4.7-inch Display and an 8MP+8MP Dual Rear Camera. If you have bought this device and want to install Stock Firmware on Blackview BV4000 Pro? Then you are in the right place. In this guide, we will install the official firmware flash file on Blackview BV4000 Pro. To flash, we will use the software known as SP Flash Tool, Formally also called the Smartphone Flash Tool. If you have installed Custom ROM or bricked your device, then this guide will be helpful to fix back to Stock ROM or unbrick it.

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then simply follow the given instruction link to install the Stock Firmware on Blackview BV4000 Pro using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software or hardware malfunctioning problem.

How to Install Stock Firmware on Blackview BV4000 Pro [Back to Stock ROM]

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Blackview BV4000 Pro
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Blackview BV4000 Pro
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Blackview BV4000 Pro
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Firmware File on Blackview BV4000 Pro 

Now, follow the full step-by-step installation process to easily flash the Stock Firmware on your Blackview BV4000 Pro device. But before heading over to the installation process, let’s take a look at the requirements.


  • ROM file supported: Blackview BV4000 Pro only. Don’t use it on other devices.
  • Charge the device battery up to 60% at least for a smoother process.
  • You will require a Windows PC/Laptop and a USB cable to connect your device with the PC.
  • You need to download the SP Flash Tool and install it on your PC.
  • Flash Tool: Download the SP Flash tool
  • USB Drivers: Download Blackview USB Drivers | MTK USB Drivers / VCOM Drivers

Download Flash Files

Software Details Download Link
Flash File Name:
File Size: 1 GB
Android Version: 7.0 Nougat
Download Link


We’re at GetDroidTips will not be responsible for any kind of error/issue that occurs to your device while/after installing this firmware or following this guide. Proceed at your own risk.

Instructions to install:

Now, let’s go to the installation steps. Here we have provided the installation method in both writing and video guide.

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Blackview BV4000 Pro, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your Blackview BV4000 Pro

For complete tutorials, follow this guide. Additionally, you can follow the video tutorial as well for better guidance.


We hope that you have successfully installed the Stock Firmware on your Blackview handset model Blackview BV4000 Pro. For any queries, you can write them down in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.