How to Install Stock ROM on Alldocube iPlay 20 (T1011S) [Firmware File / Unbrick]

Advertisements

If you have bricked your device or Want to fresh install the Stock ROM on Alldocube iPlay 20 (T1011S) then you are in the right place. Alldocube iPlay 20 is powered by Spreadtrum processor. To install Stock firmware on Alldocube iPlay 20, you need software known as SPD Flash Tool. Download the Alldocube iPlay 20 Stock Firmware, drivers, and SpreadTrum Flash Tool, then you can follow our guide to install the firmware on Alldocube iPlay 20.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Alldocube iPlay 20 back to the previous working condition.

The Alldocube iPlay20 sports a massive 10.1 inches IPS LCD display with a Full HD+ resolution, and it comes in the old aspect ratio i.e., in the 16:9 ratio. That said, it has a resolution of 1900 x 1200 pixels, a pixel density of 224 Pixel Per Inch (PPI), a screen to body ratio of 81%, and it gets protection from the Corning Gorilla Glass.

Coming to the internals of the Alldocube iPlay20, it sports the Unisoc SC9863A SoC, which is built on the 28nm process. This is a 64 bit SoC and has an octa-core setup, which includes four Cortex A55 cores that clocks at 1.6GHz, and the other four Cortex A55 cores that clock at a lower speed i.e., at 1.2GHz. To the GPU side, it sports the PowerVR GE8322 GPU. Further, this chipset pairs with 4GB of LPDDR4X RAM, which has a frequency of 1600MHz. It also comes with 64GB of onboard storage. This is also expandable via the micro SD card available in this device. Moreover, this device runs on the latest Android 10 out of the box.

How to Install Stock ROM on Alldocube iPlay 20

How to Install Stock ROM on Alldocube iPlay 20

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Alldocube iPlay 20 using SpreadTrum Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Remember this guide is also very much needed in case of upgrade or downgrade the firmware on Alldocube iPlay 20. First of all, download the software, SpreadTrum Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Alldocube iPlay 20 using this guide.

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Alldocube iPlay 20
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Alldocube iPlay 20
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Alldocube iPlay 20
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
Check Popular Post

READ THIS CAUTION:

So before jumping into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update the Stock ROM on Alldocube iPlay 20 .

Firmware Details:

  • Gapps File: Included
  • Device Supported: Alldocube iPlay 20
  • Processor: SpreadTrum
  • Tool Supported: SpreadTrum Flash Tool
  • Android Version: Android 10 Q

[/note]

Download Firmware:

Steps to Install Stock Firmware on Alldocube iPlay 20:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-requisites


GetDroidTips will not be responsible for any internal/external damages to the device that may happen while/after following this guide.

Instructions to Install Stock ROM on Alldocube iPlay 20:

Guide to Install Stock ROM using SPD Flash Tool

I hope you installed the Stock ROM on Alldocube iPlay 20 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.