Bluboo S8 Plus aka Bluboo S8+ is the latest Chinese smartphone manufactured by Bluboo company. Want to Install Stock ROM On Bluboo S8 Plus? If you own an Bluboo S8 Plus smartphone and searching for the Stock Firmware then you are at the right place. Here I will guide you to install official stock ROM on Bluboo S8 Plus smartphone.
Talking about the specs, Bluboo S8 Plus features a 6.0-inch display with a screen resolution of 720 x 1440 pixels. It is running on Android 7.0 Nougat powered by Octa-Core 4 x 1.5GHz ARM Cortex-A53+ 4 x 1.0GHz ARM Cortex-A53 and MediaTek MT6750T, 64-bit Processor clubbed by 4GB of RAM. It has external memory card support with up to 256GB. Bluboo S8 Plus is backed by 3,600 mAh battery for a long run.
This guide is simple and easy to follow. We have listed the Official Stock ROM for Bluboo S8 Plus below. Download the required file to either upgrade or downgrade your Bluboo S8 Plus. This guide is followed by a software known as SP Flash Tool which is simple and easy. You can just flash the firmware on Bluboo S8 Plus using the Smartphone Flash Tool.
Read the steps carefully before trying to install the firmware on your phone. Now you can download the SP Flash Tool, VCOM Drivers and the stock ROM from the below Pre-Requisite note.
Table of Contents
Guide To Install Official Stock ROM On Bluboo S8 Plus
Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your smartphone. You can anytime flash the stock ROM on Bluboo S8 Plus. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Bluboo S8 Plus lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Bluboo S8 Plus.
Here are below of Android 7.0 Nougat firmware Update for Bluboo S8 Plus. To install the Stock Firmware on Bluboo S8 Plus, Please follow the guide and download the ROM and SP Flash Tool on your computer. This guide is for How to Install Stock ROM on Bluboo S8 Plus smartphone.
The Advantage Of Stock Firmware:
- Flash Stock To Unbrick your Bluboo S8 Plus
- Flash Stock ROM to Fix the Bootloop problem
- Upgrade and Downgrade Bluboo S8 Plus
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Bluboo S8 Plus
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
READ THIS CAUTION:
So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Bluboo S8 Plus.
CHECK POPULAR POST
- Official and Unofficial Lineage OS 14.1 Device List and Download Link
- List Of Devices Getting Lineage OS 15.0 (Android 8.0 Oreo)
- Android Oreo is Here: List Of Official Supported Device
- List of MIUI 9 Supported Devices – Official and Unofficial
- List of All AOSP Android 8.0 Oreo Supported Device
- Resurrection Remix Oreo Release Date: List of Supported device
PREREQUISITE :
- Download the SP Flash Tool: Download and Extract it
- VCOM driver: Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
- Charge your phone for at least 70%
- Back up your device just in case if you need it later
- You need either Laptop or PC
Also Read:
- How to Root Bluboo S8 and S8+ (Plus) without PC Computer in a minute
- How To Root and Install TWRP Recovery On Bluboo S8 Plus (Bluboo S8+)
Download Files
Guide to Flash Stock Firmware using SP Flash Tool
I hope you installed the Stock ROM on Bluboo S8 Plus successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.