Cubot mobile brand has launched the Cubot P30 in October 2019. If you’re using the Cubot P30 and searching for the Stock ROM, then this guide is for you. It’s quite possible that you can face lags or bugs or performance slow down issues on your Android device. Meanwhile, you can also use custom firmware or flashed any custom file that can cause trouble to you. Now, if you want to freshly install the Stock ROM again to fix the software issue on your device, you can follow this article completely. Here we have shared the full guide on How to Install Stock ROM on Cubot P30.
Due to the open-source nature of Android, most of the Android users want to customize their devices via unlocking the device bootloader, flashing Custom ROM, Custom Recovery, Rooting, and more. But in that case, the users may experience lags or bugs or some errors on their devices. Installing the Stock ROM can fix most of the issues properly.
Even some times, due to improper flashing or unsupported files, your device may be bricked or stuck into the bootloop issue. Additionally, if you’re facing battery draining, performance issues, software update issue and want to flash the Stock ROM again on your Cubot P30 device, check out the download links, pre-requirements, and complete installation guide as well.
Table of Contents
Cubot P30: Device Overview
Cubot P30 was announced in October 2019 which sports a 6.3-inch IPS LCD display with a screen resolution of 1080 x 2340 pixels.
Cubot P30 is powered by a 4x 2.0 GHz ARM Cortex-A53, 4x 1.5 GHz ARM Cortex-A53, Cores: 8 with MediaTek Helio P23 (MT6763V) chipset coupled with 4GB of RAM and 64GB of internal storage. It also supports an external memory card. The device came out of the box with Android 9.0 Pie and backed by a 4000 mAh battery (Non-removable).
As far as the camera concerned, the device has a triple-camera setup with 12MP + 20MP + 8MP primary sensors and a selfie camera with a 13MP lens. Other connectivity option includes 2G, 3G, 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, light sensor, gyroscope, proximity sensor, fingerprint, and magnetometer. etc. The Cubot P30 comes with a face unlock feature.
Here we will use the SP Flash Tool to flash the Stock ROM on MediaTek chipset powered devices as the Cubot P30 device is powered by a MediaTek MT6763V processor.
Stock Firmware and its Advantages
The Stock ROM comes with preloaded in a smartphone or tablet device with minimal customizations but offers better stability and performance. It doesn’t come with the unlocked bootloader or custom recovery installed on your device. But the Android users manually flash Custom Firmware or other custom files in order to tweak their devices.
Therefore, using the Custom ROM may give you plenty of options but don’t have the stability. Most of the Custom ROM comes with full of bugs and you can’t use it as a daily driver.
Here we have mentioned some of the Stock ROM advantages below:
- Can unbrick your Cubot P30 device.
- Fix the device boot loop issue by flashing Stock ROM.
- Upgrade and Downgrade Stock ROM version.
- Unroot or Fix Software Bugs on your phone.
- Fix battery draining issue.
- Fix the lag or stutter on your device.
- Get back your device warranty (if applicable).
- Device Name: Cubot P30
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6763V SoC
- Android OS: Android 9.0 Pie
- File: Stock ROM
- Gapps: Included
Steps to Install Stock ROM on Cubot P30
Now, let’s take a look at the download link and pre-requirements from below before going to the installation steps.
- This ROM file is for the Cubot P30 device only.
- Charge your device fully before installing the ROM.
- You will require a Windows PC/Laptop and a USB cable.
- Make sure to take a complete backup of your device data. (if any)
Now let’s go to the Stock ROM installation process. Check out the full guide to install the Stock ROM on your Cubot P30 device.
You can also check out our full depth video tutorial as well.Video Guide to Install Stock ROM via SP Flash Tool
We hope that this guide is helpful to you and you’ve successfully installed the stock firmware on your Cubot P30 device. For any queries, feel free to write down in the comments below.