Want to Install Stock ROM On Cubot X6 ? If you own a Cubot X6 smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock ROM on Cubot X6 smartphone. This guide is simple and easy to follow. We have listed the Official Stock ROM for Cubot X6 below. Download the required file to either upgrade or downgrade your Cubot X6. This guide is followed by a software known as SP Flash Tool which is simple and easy. You can just flash firmware on Cubot X6 using the Smartphone Flash Tool. Follow the steps carefully to flash the firmware on Cubot X6 using the guide.
We ask you to read the steps before doing something wrong. READ READ READ!! Once you are done! Now you can download the SP Flash Tool, VCOM Drivers and the stock ROM from the below Pre-Requisite note.
Table of Contents
Guide To Install Official Stock ROM On Cubot X6
Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your smartphone. You can anytime flash the stock ROM on Cubot X6. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Cubot X6 lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Cubot X6.
Here are below of Android 4.2.2 Jelly Bean and Android 4.4.2 Kitkat firmware Update for Cubot X6. To install the Stock Firmware on Cubot X6, Please follow the guide and download the ROM and SP Flash Tool on your computer. This guide is for How to Install Stock ROM on Cubot X6 smartphone.
The Advantage Of Stock Firmware:
- Flash Stock To Unbrick your Cubot X6
- Flash Stock ROM to Fix the Bootloop problem
- Upgrade and Downgrade Cubot X6
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Cubot X6
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
READ THIS CAUTION:
So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Cubot X6.
CHECK POPULAR POST
- Official and Unofficial Lineage OS 14.1 Device List and Download Link
- List Of Devices Getting Lineage OS 15.0 (Android 8.0 Oreo)
- Android Oreo is Here: List Of Official Supported Device
- List of MIUI 9 Supported Devices – Official and Unofficial
- List of All AOSP Android 8.0 Oreo Supported Device
- Resurrection Remix Oreo Release Date: List of Supported device
- Download the SP Flash Tool: Download and Extract it
- VCOM driver: Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
- Charge your phone to at least 70%
- Back up your device just in case if you need it later
- You need either Laptop or PC
- How To Root and Install TWRP Recovery On Cubot X6
- Download and Install MIUI 8 On Cubot X6
- How To Install Resurrection Remix For Cubot X6
Stock ROM (Android 4.2.2 Jelly Bean)
Stock ROM (Android 4.4.2 Kitkat)
I hope you installed the Stock ROM on Cubot X6 successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.