How to Install Stock ROM on Evercoss Xtream 2 S45B [Firmware Flash File]

Here we will guide on how to install stock ROM on Evercoss Xtream 2 S45B. The guide is simple and easy to follow.

These days there is a great number of a smartphone enthusiast interested in learning the technical aspects of smartphones. So, they keep tweaking the phone in terms of hardware and software. However, sometimes, unfortunately, they end up bricking their device. Now, as we know in a bricking scenario, the phone won’t start and becomes a paperweight. This can happen with any smartphone. Some of our readers had this issue on their Evercoss Xtream 2. So, in this post, we will guide you to install Stock ROM on Evercoss Xtream 2 S45B. We have put up the download link for the corresponding ROM along with the installation guide. So, check it out.

Evercoss Xtream 2

Importance of Stock Firmware

Stock ROM is always an important part of smartphones. When you move to stock ROM, you can fix up a lot of problems. We have listed the sam below.

  • With the help of stock ROM, You can unbrick your Evercoss Xtream 2.
  • Solve the boot loop issue on Evercoss Xtream 2.
  • You can bypass system Lock and Screen Lock
  • Removes any possible case of spyware or Adware in your devices.
  • To fix any bugs on your Evercoss Xtream 2.
  • Upgrade and Downgrade Evercoss Xtream 2
  • By flashing Stock ROM, you can solve¬†software problems.
  • Revert back to stock to gain your warranty.

Firmware Details:

  • Device Supported: Evercoss Xtream 2
  • Tool Supported:¬†SPD Flash tool
  • Processor: Spreadtrum SoC
  • Android OS: 8.1 Oreo
  • File: Software Update

How to Install Stock ROM on Evercoss Xtream 2 S45B

Before doing anything, we need to have the ROM file for the designated device ie Evercoss Xtream 2. Here is the download link for the same.

Download Stock ROM File

EVERCOSS_S45B_V16_8.1_25122018: Download

Installation Guide

Before beginning with the installation remember a few pointers we have mentioned below.



  • This ROM is exclusively for the Evercoss Xtream 2 S45B. Don’t use it on other devices.
  • Charge your phone completely before installing the ROM.
  • A Windows PC/Laptop
  • Download and install Evercoss USB drivers on your Windows PC.
  • You can only install this ROM using SPD Flash Tool. So, download the Spreadtrum Flash Tool.
GetDroidTips will not be responsible for any hardware or software issue happening to your phone upon installing this firmware or following this guide. Perform this installation at your own risk..!

Now let’s get down to the installation part. Here we have put up the installation guides. Follow it and install the stock firmware on your Evercoss Xtream 2.

Guide to Install Stock ROM using SPD Flash tool

So, that’s it, guys. Now you know how to install stock ROM on Evercoss Xtream 2. We hope this tutorial was helpful to you. In case you have any queries do let us know in the comments.


Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.