Advertisements

How to Install Stock ROM on Hisense King Kong 4 – Firmware flash file

Today we will guide you to install the stock ROM on Hisense King Kong 4. This device was launched in the year 2019 with Android 8.1 Oreo. Here we have shared the official firmware for this device.

Android is full of customizations and tweaks that all the users can easily perform. But users have to follow the guide and step-by-step process properly in order to done customization successfully. Unfortunately, some of the users may not follow the proper steps or don’t flash the compatible file on their devices during Custom ROM installation or rooting, etc. Therefore, their devices can be easily bricked or stuck into the bootloop issue.

In that case, it’s highly recommended to unbrick their devices or fix the bootloop issue at first by flashing the Stock ROM again. Even if your device is having an issue with the software performance or overheating or network drop or battery charging or anything else, you should re-install the Stock ROM. As the Hisense King Kong 4 device runs on Qualcomm chipset, we will provide you the firmware installation method using the QFil Flash Tool.

Hisense King Kong 4

Steps to Install Stock ROM on Hisense King Kong 4

Before installing the Stock ROM on your Hisense King Kong 4, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Stock ROM Advantages

Stock ROM comes by default on a smartphone or tablet device that usually runs on an operating system like Android OS. All the device OEMs provide the specially crafted and compatible firmware version for each and every model. It also offers a more stable and smoother user experience which you may not find on Custom Firmware.

  • Fix Bootloop issue on Hisense King Kong 4
  • Bricked your Hisense King Kong 4? Unbrick by following this tutorial
  • Upgrade or Downgrade the software version on Hisense King Kong 4
  • Can unroot the device
  • Fix software related issues or bugs
  • Get back the device warranty again, if under warranty period

Firmware Details:

  • Device Name: Hisense King Kong 4
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: QFil Flash Tool
  • Processor: Qualcomm Snapdragon 439
  • Android Version: Android 8.1 Oreo

Required Downloads:

Pre-Requirements:

  • We assume that you’ve downloaded the firmware file and installed the other drivers & tools on your PC.
  • This Stock ROM file is exclusive for the Hisense King Kong 4 model only.
  • Try to charge your device more than 60% at least.
  • Take a Full Data Backup without Root before doing anything.
  • You will require a computer and a USB data cable.

Method 1: Instructions to Install:

  • First of all. Format and Prepare a TF-Card (8 or 16GB)
  • To install the Firmware on Hisense King Kong 4, First, download the package and move it to the TF-Card.
  • Switch Off Your Phone and Insert TF-Card to Phone
  • To start the installation, hold Volume UP (+) and Volume Down (-) key to start the installation.
  • Wait for the installation process to complete.

Method 2: Instructions to Install via QFil:

Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.

How To Install firmware via QFil

I hope you installed the Stock ROM on Hisense King Kong 4 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.