How To Install Official Stock ROM On Lanix Ilium L1050 Claro (Firmware File)

Advertisements

If you own a Lanix Ilium L1050 Claro smartphone, then here i will guide you on how to install official stock ROM on Lanix Ilium L1050 Claro smartphone. This guide is simple and easy to follow. We have listed the Official Stock ROM On Lanix Ilium L1050 Claro below. Download the required file to either upgrade or downgrade your Lanix Ilium L1050 Claro. Learn How To Install Stock ROM On Lanix Ilium L1050 Claro pushing the below Guide and use the QPST Software to flash any official Stock Firmware on Lanix Ilium L1050 Claro. Today I will guide you on How to Install Stock ROM on Lanix Ilium L1050 Claro. Below is the given list of Stock ROM for Lanix Ilium L1050 Claro. Now you can Install the Stock Firmware for Lanix Ilium L1050 Claro using the QPST.

Download the ROM which we have listed in this table below. You can also update your Lanix Ilium L1050 Claro smartphone anytime, also you can install the Stock Firmware build to revert back to old version also. In case if you have ricked your device, then you can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Lanix Ilium L1050 Claro lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Lanix Ilium L1050 Claro.

How To Install Official Stock ROM On Lanix Ilium L1050 Claro

To install the Stock Firmware on Lanix Ilium L1050 Claro, Please follow the guide and download the ROM and QPST on your computer. This guide is for How to Install Stock ROM on Lanix Ilium L1050 Claro smartphone.

Advertisements

The Advantage Of Stock Firmware:

  • Flash Stock To Unbrick your Lanix Ilium L1050 Claro
  • Flash Stock ROM to Fix the Bootloop problem
  • Upgrade and Downgrade Lanix Ilium L1050 Claro
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Lanix Ilium L1050 Claro
  • By flashing Stock Firmware, you can solve software problems.
  • Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM.

CHECK POPULAR POST

RELATED POST

Required Files

Stock ROM (Ilium L1050_CLARO_SW_01 – MSM8916 5.1.1)

Download QPST

PREREQUISITE :

  • THis guide is to Install Stock Firmware on Lanix Ilium L1050 Claro
  • This will work Lanix Ilium L1050 Claro
  • Download the QPST
  • Install the Latest Lanix USB Drivers.
  • Charge your phone to at least 70%
  • Back up your device just in case if you need it later
  • You need either Laptop or PC

How to Update or Downgrade the the STOCK ROM on Lanix Ilium L1050 Claro:

  1. First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
  2. You will find two files with the name : Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip QPST folder
  3. Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop QPST install
  4. After Installation, Go to the Installed Location in the C Drive
  5. Open the QPST Configuration QPST Configuration exe open
  6. Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it QPST Configuration
  7. Now Open the EMMC Software Downloader in the same folder located all the QPST Files EMMC Software download
  8. In EMMC Software Downloader, Check program boot loaders -> Browse for the device com portEMMC Software download Browse
  9. Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)click and load xml
  10. Now tap on Load Patch def and browse for patch0.xml in folder ROM load patch
  11. Check the search path 2 and browse for the folder ROM search path QPST
  12. Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
  13. That’s it ! Once your installation is done ! Reboot the phone ! Congrats, you successfully installed Stock ROM on Lanix Ilium L1050 Claro

I hope you installed the Stock Firmware on Lanix Ilium L1050 Claro successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.