Advertisements

How to Install Stock ROM on Myfon S10 Pro (Firmware Guide)

Want to flash the Stock ROM on Myfon S10 Pro, then you are in the right place. In this guide, you can flash the stock firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as WiFi and Bluetooth issues, unbrick your device, resolve lag or bad performance, and also fix any software related problems.

To flash the Stock ROM on Myfon S10 Pro, we are using the SPD Flash tool aka Spreadtrum Flash Tool as this device is powered by Spreadtrum SoC. We have shared all the pre-requisites files to download and install the stock ROM on your device.

How to Install Stock ROM on Myfon S10 Pro

Why We Need Stock Firmware?

Stock Firmware or a Stock ROM is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your Myfon S10 Pro. If you are facing any problem with your device, your final attempt will be to re-install the stock ROM. This way, you can restore your device back to stock ROM. This guide will be more useful to those users who always want to try rooting, installing mods or custom ROM.

Advantage of Stock ROM:

Here are the answers to why you need to download and save the Myfon S10 Pro Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Myfon S10 Pro
  • You can fix the boot loop issue on Myfon S10 Pro
  • Fix Unfortunately, the app has stopped error on Myfon S10 Pro
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Myfon S10 Pro
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Myfon S10 Pro back to Factory State

Firmware Details:

  • Device Name: Myfon S10 Pro
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: SPD Flash Tool
  • Processor: Spreadtrum SC7731e

How to Flash Myfon S10 Pro Firmware File

Before installing the Stock ROM on Myfon S10 Pro, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Download Flash Files

Software Details Download Link
Flash File Name: j5_31e_qhd_480_1014_yabozi_dp888_dp98 S10_pro_My_Fon_classk_d3_1288_user_ota_2020_12_17_11_30 Download Link

Instructions to Install: via SPD Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

Guide to Install Stock ROM using SPD Flash Tool

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Myfon S10 Pro device successfully. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.