Advertisements

How to Install Stock ROM on Smartex M520 – Firmware flash file

Today we will guide you to install the stock ROM on Smartex M520. Here we have shared the official firmware for this device.

Android is full of customizations and tweaks that all the users can easily perform. But users have to follow the guide and step-by-step process properly in order to done customization successfully. Unfortunately, some of the users may not follow the proper steps or don’t flash the compatible file on their devices during Custom ROM installation or rooting, etc. Therefore, their devices can be easily bricked or stuck into the bootloop issue.

In that case, it’s highly recommended to unbrick their devices or fix the bootloop issue at first by flashing the Stock ROM again. Even if your device is having an issue with the software performance or overheating or network drop or battery charging or anything else, you should re-install the Stock ROM. As the Smartex M520 device runs on MediaTek chipset, we will provide you the firmware installation method using the SP Flash Tool.

Smartex M520

Steps to Install Stock ROM on Smartex M520

Before installing the Stock ROM on your Smartex M520, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Stock ROM Advantages

Stock ROM comes by default on a smartphone or tablet device that usually runs on an operating system like Android OS. All the device OEMs provide the specially crafted and compatible firmware version for each and every model. It also offers a more stable and smoother user experience which you may not find on Custom Firmware.

  • Fix Bootloop issue on Smartex M520
  • Bricked your Smartex M520? Unbrick by following this tutorial
  • Upgrade or Downgrade the software version on Smartex M520
  • Can unroot the device
  • Fix software related issues or bugs
  • Get back the device warranty again, if under warranty period

Firmware Details:

  • Device Name: Smartex M520
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6737
  • Android Version: Android 10

Required Downloads:

Pre-Requirements:

  • We assume that you’ve downloaded the firmware file and installed the other drivers & tools on your PC.
  • This Stock ROM file is exclusive for the Smartex M520 model only.
  • Try to charge your device more than 60% at least.
  • Take a Full Data Backup without Root before doing anything.
  • You will require a computer and a USB data cable.

Instructions to Install: via Recovery

  1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  2. Go to Developer Options –> Enable USB Debugging.
  3. Download firmware from above and save it in Internal storage.
  4. Now Reboot to Recovery Mode.
  5. Select Apply Update from SD Card.
  6. Select the Downloaded ZIP file from SD Card.
  7. Wait until the installation process Completes.
  8. Once the installation completed. Reboot the Phone

Instructions to Install: via SP Flash tool

Now, without wasting anymore time, let’s jump into the firmware installation steps below:

Flash Stock ROM using the SP Flash Tool

Follow our full-depth video guide below:

Video Guide to Install Stock ROM via SP Flash Tool

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Smartex M520 device successfully. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.