How To Install Official Stock ROM On Swipe Konnect Prime (Firmware File)

Advertisements

Today I will guide you on How to Install Stock ROM on Swipe Konnect Prime. Here are the list of Stock ROM on Swipe Konnect Prime. This is an update for the Swipe Konnect Prime. Now you can Install the Stock ROM using the SpreadTrum Flash Tool on your Swipe Konnect Prime Smartphone. Download the ROM which we have listed with the latest update.

You can also update your Swipe Konnect Prime smartphone anytime, also you can install the listed earlier build to revert back to old version also. In case if you have bricked your device, then you can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Swipe Konnect Prime lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Swipe Konnect Prime.

How To Install Official Stock ROM On Swipe Konnect Prime

To install the Stock Firmware on Swipe Konnect Prime, Please follow the guide and download the ROM and SpreadTrum Flash Tool on your computer. This guide is for How to Install Stock ROM on Swipe Konnect Prime smartphone.

Advantage of Stock Firmware :

  • Flash Stock To Unbrick your Swipe Konnect Prime
  • Flash Stock ROM to Fix the Bootloop problem
  • Upgrade and Downgrade Swipe Konnect Prime
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Swipe Konnect Prime
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

READ THIS CAUTION : So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Swipe Konnect Prime.

CHECK POPULAR POST

Required Files

Download File Description
Download Swipe_Konnect_Prime_V1.6_25072017_SPD.zip

Download SpreadTrum Flash Tool

PREREQUISITE :

  • Download the Factory Download/Upgrade 
  • This will work only on Swipe Konnect Prime
  • Charge your phone to at least 70%
  • Install the Latest Swipe USB Drivers.
  • Back up your device just in case if you need it later
  • You need either Laptop or PC

How to Update or Downgrade the STOCK ROM on Swipe Konnect Prime :

  1. First of all, do all the PREREQUISITE STEPS and Now Open the Extracted Factory Download/UpgradeDownload Folder
  2. In the folder, you will find 4 files which are shown in the screenshot below How To Install Official Stock ROM On
  3. Extract the UPGRADE DOWNLOAD or FACTORY DOWNLOAD to start flashing the ROM, here i will guide on using the UPGRADEDOWNLOAD Zip file.
  4. So now, Extract the Zip file UPGRADEDOWNLOAD and Open the file .exe named UPGRADEDOWNLOADHow To Install Official Stock ROM On
  5. Now Tap on the load packet option (Check Screenshot) to load the firmware. So browse the file with extension .pac from the ROM File you downloaded How To Install Official Stock ROM On
  6. After loading .pac, Connect your Swipe Konnect Prime smartphone to PC/Laptop and Click thestartbutton to start upgrading. How To Install Official Stock ROM On
  7. Wait until the process completes.
  8. During the flashing, your phone will restart automatically.
  9. That’s it ! You have updated the Stock ROM on Swipe Konnect Prime successfully.

I hope you installed the Stock ROM on Swipe Konnect Prime successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.