How to Install Stock ROM on Swipe Neo Power [Firmware File / Unbrick]

If you have bricked your device or Want to fresh install the Stock ROM on Swipe Neo Power then you are in the right place. Swipe Neo Power is powered by Spreadtrum processor. To install Stock firmware on Swipe Neo Power, you need software known as SPD Flash Tool. Download the Swipe Neo Power Stock Firmware, drivers, and SpreadTrum Flash Tool, then you can follow our guide to install the firmware on Swipe Neo Power.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Swipe Neo Power back to the previous working condition.

How to Install Stock ROM on Swipe Neo Power

How to Install Stock ROM on Swipe Neo Power

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Swipe Neo Power using SpreadTrum Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Remember this guide is also very much needed in case of upgrade or downgrade the firmware on Swipe Neo Power. First of all, download the software, SpreadTrum Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Swipe Neo Power using this guide.

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Swipe Neo Power
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Swipe Neo Power
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Swipe Neo Power
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
Check Popular Post


So before jumping into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update the Stock ROM on Swipe Neo Power .

Firmware Details:

  • Gapps File: Included
  • Device Supported: Swipe Neo Power
  • Processor: SpreadTrum SC9832a
  • Tool Supported: SpreadTrum Flash Tool
  • Android Version: Android 6.0 Marshmallow


Download Firmware:

Steps to Install Stock Firmware on Swipe Neo Power:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.


GetDroidTips will not be responsible for any internal/external damages to the device that may happen while/after following this guide.

Instructions to Install Stock ROM on Swipe Neo Power:

Guide to Install Stock ROM using SPD Flash Tool

I hope you installed the Stock ROM on Swipe Neo Power successfully, Now please rate this website with your comment. We always welcome feedback and improvements.