Ulefone Armor X5 Firmware Flash File (Stock ROM | Android 9.0, 10, 11)

Looking to install the firmware file on Ulefone Armor X5? then you are at the right place. Ulefone Armor X5 came out of the box with Android 9.0 and under the hood runs on a MediaTek processor. In this guide, we will help you to flash the official firmware file on Ulefone Armor X5. To flash the firmware file, you need software known as SP Flash Tool, Formally also called the Smartphone Flash Tool.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these processes carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Ulefone Armor X5 back to the previous working condition.

Ulefone Armor X5 is powered by a 4x 2.0 GHz ARM Cortex-A53, 4x 1.5 GHz ARM Cortex-A53, Cores: 8 with MediaTek Helio P23 (MT6763V) chipset coupled with 3GB of RAM and 32GB of internal storage. It also supports an external memory card. The device came out of the box with Android 9.0 Pie and was backed by a 5000 mAh battery (Non-removable).

As far as the camera is concerned, the device has a dual-camera setup with 13MP + 2MP primary sensors and a selfie camera with a 5MP lens. Other connectivity option includes 4G, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, proximity sensor, and compass. etc. The Ulefone Armor X5 comes with a face unlock feature.

Ulefone Armor X5 Firmware Flash File

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Ulefone Armor X5
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Ulefone Armor X5
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Ulefone Armor X5
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Ulefone Armor X5 back to Factory State
  • Bypass Pattern lock on your device

How to Flash Ulefone Armor X5 Firmware File

Before installing the Stock ROM on your Ulefone Armor X5, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Advertisements

Pre-Requirements:

Download Flash Files

Software Details Download Link
Flash File Name: Ulefone_Armor_X5_MT6763_EEA_V01_20191121.zip
File Size: 2 GB
OS: Android 9.0
Download
Flash File Name: Ulefone_Armor_X5_MT6763_Non-Eu_V01_20191125.zip
File Size: 2 GB
OS: Android 9.0
Download
Flash File Name: GQ3082MH1_KSP2Q_Ulefone_GH_20210618_V02(Non-EU).zip
File Size: 1.53 GB
OS: Android 9.0
Download
Flash File Name: GQ3082MH1_KSP2Q_Ulefone_EEA_GH_20210315_V02(EU).zip
File Size: 1.53 GB
OS: Android 9.0
Download
Flash File Name: GQ3082SH1_KSP2N2_Ulefone_20210126_V01(Non eu).zip
File Size: 1.6 GB
OS: Android 10
Download
Flash File Name: GQ3082SH1_KSP2N2_Ulefone_EEA_20210126_V01(Eu).zip
File Size: 1.6 GB
OS: Android 10
Download
Flash File Name: GQ3082SH3_KSP2N2E_Ulefone_20211009_V01_Non-EU.zip
File Size: 2 GB
OS: Android 11
Download
Flash File Name: GQ3082SH3_KSP2N2E_X5_EEA_20211011_V01_EU.zip
File Size: 1.94 GB
OS: Android 11
Download

Instructions to Install: via SP Flash tool

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Ulefone Armor X5, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your Ulefone Armor X5

Follow Complete Tutorial

Watch Video Tutorial

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Ulefone Armor X5 device successfully. Feel free to ask in the comments below for any queries.

Advertisements

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.