How to Install Stock ROM on Wizphone WP005 [Firmware Flash File]

In this tutorial, we will guide you on how to install the stock ROM flash file on Wizphone WP005. The device came out of the box with Android 8.1 Oreo and powered by a 1.2Ghz SoC processor. If you are someone who is looking to fix your device’s common issues like boot loop, remove pattern lock, bypass FRP lock, or repair IMEI, then this guide is for you.

To install the firmware flash file on Wizphone WP005, you need to download the software called the YGDP flash tool. This method simple and easy.

How to Flash Wizphone WP005 Firmware File

Before installing the Stock ROM on your Wizphone WP005, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

• Supported device: Wizphone WP005
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup of your android phone
• Download Drivers and Tools: YGDP Tool and Android USB Drivers

Download Flash Files

Instructions to Install: 

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. First of all, Download the Firmware zip file 
2. Now Download the latest YGDP Tool for your PC from the above link.
3. Make sure you downloaded the smartphone drivers for your PC
4. After installing the YGDP tool, just click and open the YGDP tool on your computer.
5. If it asks for a password on the first run, use the password below and click Login.

   Password: 9527

6. Now Click on configure and select the.CPB file. 
7. Browse.CBP file from the Nougat folder and click on Apply.
   
8. Now Switch off your device and connect to PC in ‘bootloader mode’ under the “recovery menu.”
9. Now, click on the Start button to start the installation process.
   
10. You will see the ‘Successful Upgrade ‘message after a successful installation.

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Wizphone WP005 device successfully. Feel free to ask in the comments below for any queries.