How To Install Official Stock ROM On ZTE EQ10

Want to Install Stock ROM On ZTE EQ10 ? If you own a ZTE EQ10 smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock ROM on ZTE EQ10 smartphone. This guide is simple and easy to follow. We have listed the Official Stock ROM for ZTE EQ10 below. Download the required file to either upgrade or downgrade your ZTE EQ10. This guide is followed by a software known as SP Flash Tool which is simple and easy. You can just flash firmware on ZTE EQ10 using the Smartphone Flash Tool. Follow the steps carefully to flash the firmware on ZTE EQ10 using the guide.

We ask you to read the steps before doing something wrong. READ READ READ!! Once you are done! Now you can download the SP Flash Tool, VCOM Drivers and the stock ROM from the below Pre-Requisite note.

How To Install Official Stock ROM On ZTE EQ10

Guide To Install Official Stock ROM On ZTE EQ10

Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your smartphone. You can anytime flash the stock ROM on ZTE EQ10. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your ZTE EQ10 lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your ZTE EQ10.

To install the Stock Firmware on ZTE EQ10, Please follow the guide and download the ROM and SP Flash Tool on your computer. This guide is for How to Install Stock ROM on ZTE EQ10 smartphone.

The Advantage Of Stock Firmware:

  • Flash Stock To Unbrick your ZTE EQ10
  • Flash Stock ROM to Fix the Bootloop problem
  • Upgrade and Downgrade ZTE EQ10
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on ZTE EQ10
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

READ THIS CAUTION:

Advertisements

So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on ZTE EQ10.

CHECK POPULAR POST

PREREQUISITE :

  • Download the SP Flash Tool: Download and Extract it
  • VCOM driver:  Download – Instal the VCOM Driver on your computer (still compatible with MT67xx phones)
  • Charge your phone to at least 70%
  • Back up your device just in case if you need it later
  • You need either Laptop or PC

Download Files

Stock ROM

Guide to Flash Stock Firmware using SP Flash Tool

I hope you installed the Stock ROM on ZTE EQ10 successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.

Advertisements

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.