Ulefone Armor X6 Firmware Flash File (Stock ROM)

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your Ulefone Armor X6 then you can easily install the firmware flash file on it. Since Ulefone Armor X6 is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your Ulefone Armor X6 device. On this page, we will guide you on how to flash the firmware file on Ulefone Armor X6 using the flash tool.

The most smartphone gets hard brick because of the carelessness of their users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with Ulefone Armor X6 users. But don’t worry, as installing Stock ROM on Ulefone Armor X6 is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick Ulefone Armor X6 back to the previous working condition.

Ulefone Armor X6 Firmware Flash File

The Ulefone Armor X6 features a 5.0 inch IPS LCD display with an HD+ resolution. It also has a screen-to-body ratio of 58.2 percent, an aspect ratio of 16:9, and a pixel density of 294 Pixel Per Inch ( PPI ). As we said above, this is a rugged smartphone, and so it has various protection.

Coming to the internals, the Ulefone Armor X6 sports the MediaTek MT6580 SoC, and this is built on the older 28nm process. This quad-core SoC has four Cortex A7 cores and is clocked at 1.3GHz. On the GPU side, it has the ARM Mali 400 GPU. Talking about memory options, it features 6GB of RAM and 16GB of internal storage. Further, this is also expandable via a micro SD card. The device has a hybrid SIM card slot, and this means that you can insert two Nano type SIM cards or a Nano type SIM, and a micro SD card.

Coming to the optics, the Ulefone Armor X6 sports a single rear camera setup. Usually, rugged smartphones don’t come with good specifications. This camera setup includes an 8MP sensor with an aperture value of f/2.2 and autofocus. It also supports Dual LED flash. To the front, the device sports a 5MP snapper. Both the front and rear cameras can only shoot videos up to 720P @ 30fps.


This Ulefone Armor X6 smartphone comes with a non-removable 4,000 mAh Lithium Polymer battery. The battery charges over the micro USB port, and doesn’t come with support for any fast charging tech. Sensors on this smartphone include Accelerometer, proximity, and compass.

Connectivity options include Wi-Fi 802.11 b/g/n, hotspot, Bluetooth 4.0, A2DP, GPS with A-GPS, FM radio, RDS, recording, and micro USB 2.0. The device is available in a single color option, namely Black. Coming to the dimensions, it measures about 150 x 78.9 x 14.4 mm (5.91 x 3.11 x 0.57 in) and weighs about 223.8 grams. As it is a rugged smartphone, it comes with protection like MIL-STD-810G, which totally protects against Dust, Water, and Concrete. It also means that it has Drop-to-concrete resistance from up to 1.2 m. This also comes with support for IP68 protection, which can withstand up to 1.5 meters for 30 minutes.

Ulefone Armor X6 Firmware Flash File Guide

Remember this guide is also very much needed in case of upgrading or downgrading the firmware on Ulefone Armor X6. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Ulefone Armor X6 using this guide.

As we said above – installing a firmware file on Ulefone Armor X6 is no rocket science. The actual process of flashing Stock Firmware on Ulefone Armor X6 is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Ulefone Armor X6 using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.


Advantage Of Ulefone Armor X6 Stock Firmware:

  • Flash Stock To Unbrick your Ulefone Armor X6
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Ulefone Armor X6
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Ulefone Armor X6
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide

Firmware Details:

  • Device Supported: Ulefone Armor X6
  • Tool Supported: SP Flash Tool
  • Gapps Included
  • Processor: MediaTek
  • OS: Android 9.0

Steps to Install Stock Firmware on Ulefone Armor X6

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.


Ulefone Armor X6 Flash Files

Software Details Download Link
Flash File Name: Ulefone_Armor_X6_MT6580_EEA_EU_V01_20191218.zip
File Size: 1 GB
OS: Android 9.0
Flash File Name: Ulefone_Armor_X6_MT6580_Non-Eu_V01_20191218.zip
File Size: 1 GB
OS: Android 9.0
Flash File Name: GQ3085DH1_KAP2E_Ulefone_20210315_V02(Non EU).zip
File Size: 1.2 GB
OS: Android 9.0
Flash File Name: GQ3085DH1_KSP2E_Ulefone_EEA_20210315_V02(EU).zip
File Size: 1.2 GB
OS: Android 9.0
Flash File Name: GQ3085DH1_KSP2E_Ulefone_EEA_20211215_V02_EU.zip
File Size: 1.20 GB
OS: Android 9.0
Flash File Name: GQ3085DH1_KSP2E_Ulefone_20211215_V02_Non_EU.zip
File Size: 1.20 GB
OS: Android 9.0

Instructions to Install


GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Ulefone Armor X6, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your Ulefone Armor X6

Follow Complete Tutorial


Watch Video Tutorial

I hope you installed the Stock Firmware on Ulefone Armor X6 successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.