On this page, we will guide you on how to install the official stock ROM flash file on your Ulefone Note 6P. Well, the device is based on Android 11.0 which is powered by the Spreadtrum Unisoc SC9863A processor. This guide will be helpful to unbrick or fix any software issues on your device.
To install the firmware flash file on Ulefone Note 6P, you need to download the software called SPD Flash tool (also known as Spreadtrum flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.
Page Contents
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Ulefone Note 6P Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Ulefone Note 6P
- You can fix the boot loop issue on Ulefone Note 6P
- Fix Unfortunately, the app has stopped errors on Ulefone Note 6P
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Ulefone Note 6P
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Ulefone Note 6P back to Factory State
How to Flash Ulefone Note 6P Firmware File
Before installing the Stock ROM on your Ulefone Note 6P, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Ulefone Note 6P
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup of your android phone
- Download Drivers and Tools: Spreadtrum drivers, SPD Flash Tool, and Ulefone USB Drivers
Ulefone Note 6P Flash Files
| Software Details | Download Link |
| Flash File Name: GQ3277-BH1_ZNL631_Ulefone_EEA_20211113_V11.zip File Size: 1.22 GB Android Version: 11.0 |
Download |
| Flash File Name: GQ3277-BH1_ZNL631_Ulefone_20211115_V04.zip File Size: 1.23 GB Android Version: 11.0 |
Download |
Instructions to Install: via SPD Flash tool
Now, without wasting any more time, let’s jump into the firmware installation steps below:
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Ulefone Note 6P device successfully. Feel free to ask in the comments below for any queries.