Here we will guide you on how to unlock bootloader on Innjoo Halo 3. If you are looking to install TWRP Recovery or even if you want to root your phone, then you may have to unlock the bootloader on your device. Innjoo Halo 3 device comes with bootloader locked. To unlock the bootloader, you can follow this guide.
A Bootloader is a code which runs when we turn on our device. This code initializes some hardware and then loads the kernel and ramdisk, and gets the boot process going. So this process is known as Bootloader. The same concept applies to all the technical stuff such as Laptop, PC, Smartphones and any such device. Every Android OEM manufacturers lock the bootloader even though it is an Open Source. So if you want to try any CUSTOM ROM, it is impossible to load the CUSTOM ROM without the Unlock Bootloader.
Steps to Unlock Bootloader on Innjoo Halo 3
- First of all, Enable Developer Mode on the Innjoo Halo 3
- Launch the Settings application
- Scroll down and tap on the Developer Options option
- Toggle the OEM Unlock option on
- Confirm by tapping the enable option.
- That’s it! You have unlocked the bootloader on your Innjoo Halo 3.
Most Mediatek device comes out of the box with the bootloader unlock, read more to know about How to Unlock Bootloader on Any Mediatek Device
I hope this guide was easy to enable the OEM unlock to unlock bootloader on Innjoo Halo 3.
Innjoo Halo 3 Specifications:
Talking about the specifications, Innjoo Halo 3 features a 5-inch IPS LCD display with a screen resolution of 1280 x 720 Pixels. It is powered by MediaTek MTK6580 Processor coupled with 1GB of RAM. The phone packs 16GB internal memory with expandable storage support of 128GB via microSD card. The camera on the Innjoo Halo 3 comes with 13MP rear camera with dual-LED dual-tone flash and 5MP front camera for selfies. It is backed by a Non-Removable 2,800 mAh Lithium-Polymer Battery. Innjoo Halo 3 also has a fingerprint sensor on the back.