Here we will guide you on how to unlock bootloader on Intex Aqua E4. If you are looking to install TWRP Recovery or even if you want to root your phone, then you may have to unlock the bootloader on your device. Intex Aqua E4 device comes with bootloader locked. To unlock the bootloader, you can follow this guide.
A Bootloader is a code which runs when we turn on our device. This code initializes some hardware and then loads the kernel and ramdisk, and gets the boot process going. So this process is known as Bootloader. The same concept applies to all the technical stuff such as Laptop, PC, Smartphones and any such device. Every Android OEM manufacturers lock the bootloader even though it is an Open Source. So if you want to try any CUSTOM ROM, it is impossible to load the CUSTOM ROM without the Unlock Bootloader.
Steps to Unlock Bootloader on Intex Aqua E4
- First of all, Enable Developer Mode on the Intex Aqua E4
- Launch the Settings application
- Scroll down and tap on the Developer Options option
- Toggle the OEM Unlock option on
- Confirm by tapping the enable option.
- That’s it! You have unlocked the bootloader on your Intex Aqua E4.
Most Mediatek device comes out of the box with the bootloader unlock, read more to know about How to Unlock Bootloader on Any Mediatek Device
I hope this guide was easy to enable the OEM unlock to unlock bootloader on Intex Aqua E4.
Intex Aqua E4 Specifications:
Talking about the specifications, Intex Aqua E4 features a 4-inch TFT display with a screen resolution of 480 x 800 Pixels. It is powered by MediaTek, MT6735M Processor coupled with 1GB of RAM. The phone packs 8GB internal memory with expandable storage support of 32GB via microSD card. The camera on the Intex Aqua E4 comes with 2MP rear camera with dual-LED dual-tone flash and 2MP front camera for selfies. It is backed by a Removable 1,800 mAh Lithium-Ion Battery.