How To Unlock Bootloader On LG K20 Plus (T-Mobile / Metro PCs)

Now you can unlock your bootloader on LG K20 Plus (T-Mobile / Metro PCs) officially. Today we will guide you on How to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs) Smartphones. So before installing TWRP, LG K20 Plus (T-Mobile / Metro PCs) smartphones should be unlocked. So here is the full guide to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs) Smartphone. If you unlock bootloader you may void the warranty. By Unlocking Bootloader you can install TWRP, Flash Rooting Zip file or custom ROM on your phone. Read more What is unlocking below.

Follow this guide on How to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs). Try this only on LG K20 Plus (T-Mobile / Metro PCs) smartphone. This method to unlock bootloader on LG K20 Plus (T-Mobile / Metro PCs) is simple to follow. But please do read the steps below carefully.

LG released LG K20 Plus (T-Mobile / Metro PCs) in December which came out of the box with Android 7.0 Nougat. It sports a 5.3 inches display with a resolution of 720 x 1280 pixels. LG K20 Plus (T-Mobile / Metro PCs) is powered by 1.4 GHz Quad-core Qualcomm Snapdragon 425 chipset clubbed with 2 GB RAM and 16 GB or 32 GB onboard storage. It also supports micro SD card with up to 256 GB. It features a 13 MP camera with f/2.2 aperture and 5 MP front facing selfie shooter.

How To Unlock Bootloader On LG K20 Plus (T-Mobile and Metro PCs)

How to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs)

Now you can unlock bootloader easily by following this simple guide on How to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs). Official Bootloader Unlock for LG K20 Plus (T-Mobile / Metro PCs) will also void the device warranty. So if you planning to unlock bootloader on LG K20 Plus (T-Mobile / Metro PCs), then its always better to wait until your warranty gets over. In case if you have unlocked bootloader, then you can always re-lock the bootloader on your device anytime.

What is Unlock Bootloader ?

Advertisements

A Bootloader is a code which runs when we turn on our device. This code initializes some hardware and then loads the kernel and ramdisk, and gets the boot process going. So this process is known as Bootloader. The same concept applies to all the technology stuff such as Laptop, PC, Smartphones and any such device. Every Android OEM manufacturers lock the bootloader even though it is an Open Source. So if you want to try any CUSTOM ROM, it is impossible to load the CUSTOM ROM without the Unlock Bootloader. So Manufacturer made a policy of making the smartphone with Unlocked Bootloader will void the warranty. They want you to stick with the Stock ROM. Unlock Bootloader allows you to Root your android smartphone, Flash TWRP and Custom ROM in a simple easy method.

Before doing the methods, I just want to warn you that. By doing this, you will loose the warranty and sometime if you dont read the steps and do something wrong can brick your device. So read carefully before doing something wrong.

What you need:

  1. This Update is only for LG K20 Plus (T-Mobile / Metro PCs) users.
  2. You need Laptop or PC
  3. Working USB Cable
  4. Charge your phone to atleast 70%
  5. GetDroidTips.com is not responsible for any damage to your phone while installing this Update.
  6. Make sure that you have latest USB drivers installed.
  7. Download the ADB Fastboot tools.
  8. Take a complete backup of your phone and then proceed.
  9. Download LG Bridge : Click Here

Steps to Unlock Bootloader on LG K20 Plus (T-Mobile / Metro PCs)

  1. First of all enable the Developer Option
  2. To Enable the Developer Option, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled
  3. Turn the phone off. Then boot it into fastboot mode by holding volume up + power. The phone will display “fastboot” text indicating that it has successfully entered fastboot mode.
  4. Now go to the folder where you have installed the SDK Tool
  5. Plug the phone into your PC, then open a command prompt window by pressing Shift Key + Right Mous Click Command prompt window
  6. Now type the command in your command window
    fastboot devices
  7. This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.
  8. If the phone has been recognized by the command above, proceed to unlocking the bootloader with the following command:

    Remember that this step will wipe EVERYTHING off the phone 

    fastboot oem unlock
  9. After the above command has finished excuting, run the following
    fastboot reboot
  10. The phone will reboot. Wait until the phone has fully booted up into android, and enjoy!

I hope this guide was helpful to you. If you do like then please hit the share button also leave a comment. We will always here to assist you.

Comments

  1. when you say the phone need to be unlocked, what do you mean by that? Do you mean carrier unlock?
    If i have a metroPCS LG k20 this method will unlock my phone or not?

    1. No… You need to Unlock the bootloader. Not carrier. For Unlocking Bootloader, first enable the developer option —> Go to Settings –> About Phone —> Build number. Tap on the build number more than 7-8 times which will activate the developer option, Now go back to settings –> Developer option and there you will find option to Unlock Bootloader.

  2. I have the lgk20 plus I bought and when I reset the phone it put it in FRP. I cant get in touch with this person anymore can you help me with a step by step tutorial on exactly how to fix this. Thank you very much

  3. I have a ZTE blade Max z and I tried all the steps you have listen and it’s not working for my phone at all.. is there something else I can do?

  4. Why would I need a pc for my scrappy lg. Is there no way buffer a loopback within the same scrappy sony kernel device

  5. to all the people that is asking first you have to get a unlock password from the manufacturer Website, without it my friends yall wont be able to bootload your phone…..

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.